Freescale Semiconductor, Inc.
Data Sheet: Technical Data
KV10P48M75
Rev 4, 02/2015
Kinetis V Series KV10, 32/16 KB
MKV10Z32VLC7
MKV10Z32VFM7
MKV10Z32VLF7
MKV10Z16VLC7
MKV10Z16VFM7
MKV10Z16VLF7
Flash
75 MHz Cortex-M0+ Based Microcontroller
The Kinetis V Series KV1x MCU family is the entry point into the
V Series and provides a high-performance, cost-competitive
solution for 3-phase sensorless BLDC and PMSM motor control.
Built upon the ARM® Cortex®-M0+ based core running at 75
MHz with hardware square root and divide capability, it delivers a
35% increase in performance versus comparable MCUs allowing
it to target BLDC as well as PMSM motors.
32 QFN
5 x 5 x 0.9 mm Pitch
0.5 mm
32 LQFP
7 x 7 x 1.4 mm Pitch
0.8 mm
Additional features include:
• dual 16-bit analog-to-digital controllers (ADCs) sampling at
up to 1.2 MS/s in 12-bit mode.
• multiple motor control timers, up to 32 KB of flash memory
and a comprehensive enablement suite from Freescale
• third-party resources including reference designs, software
libraries and powerful motor configuration tools
48 LQFP
7 x 7 x 1.4 mm Pitch 0.5 mm
Performance
• Up to 75 MHz ARM Cortex-M0+ based core
Communication interfaces
• One 16-bit SPI module
• One I2C module
• Two UART modules
Memories and memory interfaces
• Up to 32 KB of program flash memory
• Up to 8 KB of RAM
Timers
• Programmable delay block
• One 6-channel FlexTimer (FTM) for motor control/
general purpose applications
• Two 2-channel FlexTimers (FTM) with quadrature
decoder functionality
System peripherals
• Nine low-power modes to provide power optimization
based on application requirements
• 4-channel DMA controller
• SWD interface and Micro Trace buffer
• Bit Manipulation Engine (BME)
• External watchdog timer
• 16-bit low-power timer (LPTMR)
Operating Characteristics
• Advanced independent clocked watchdog
• Memory Mapped Divide and Square Root (MMDVSQ)
module
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Clocks
Analog modules
• 32 to 40 kHz or 3 to 32 MHz crystal oscillator
• Multipurpose clock generator (MCG) with frequency-
locked loop referencing either internal or external
reference clock
• Two 16-bit SAR ADCs
• 12-bit DAC
• Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
Security and integrity modules
• 80-bit unique identification (ID) number per chip
• Hardware CRC module
Human-machine interface
• General-purpose I/O
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2014–2015 Freescale
Semiconductor, Inc. All rights reserved.