NXP Semiconductors
Data Sheet: Technical Data
Document Number: KL02P32M48SF0
Rev. 5 08/2017
Kinetis KL02 32 KB Flash
MKL02ZxxVFG4
MKL02ZxxVFK4
MKL02ZxxVFM4
48 MHz Cortex-M0+ Based Microcontroller
Designed with efficiency in mind. Features a size efficient, ultra-
small package, energy efficient ARM Cortex-M0+ 32-bit
performance. Shares the comprehensive enablement and
scalability of the Kinetis family.
16-pin QFN (FG)
24-pin QFN (FK)
3 x 3 x 0.65 Pitch 0.5
4 x 4 x 1 Pitch 0.5 mm
mm
This product offers:
• Run power consumption down to 36 μA/MHz in very low
power run mode
• Static power consumption down to 2 μA with full state
retention and 4 μs wakeup
• Ultra-efficient Cortex-M0+ processor running up to 48 MHz
with industry leading throughput
• Memory option is up to 32 KB flash and 4 KB RAM
• Energy-saving architecture is optimized for low power with
90nm TFS technology, clock and power gating techniques,
and zero wait state flash memory controller
32-pin QFN (FM)
5 x 5 x 1 Pitch 0.5 mm
Performance
• 48 MHz ARM® Cortex®-M0+ core
Human-machine interface
• Up to 28 general-purpose input/output (GPIO)
Memories and memory interfaces
• Up to 32 KB program flash memory
• Up to 4 KB SRAM
Communication interfaces
• One 8-bit SPI module
• One low power UART module
• Two I2C module
System peripherals
• Nine low-power modes to provide power optimization
based on application requirements
• COP Software watchdog
• SWD debug interface and Micro Trace Buffer
• Bit Manipulation Engine
Analog Modules
• 12-bit SAR ADC
• Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
Timers
Clocks
• Two 2-channel Timer/PWM modules
• 16-bit low-power timer (LPTMR)
• 32 kHz to 40 kHz crystal oscillator
• Multi-purpose clock source
• 1 kHz LPO clock
Security and integrity modules
• 80-bit unique identification number per chip
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.