5秒后页面跳转
MIC826 PDF预览

MIC826

更新时间: 2024-11-24 14:54:39
品牌 Logo 应用领域
美国微芯 - MICROCHIP /
页数 文件大小 规格书
22页 1709K
描述
The MIC826 is a low-current, ultra-small, voltage supervisor with manual reset input, watchdog tim

MIC826 数据手册

 浏览型号MIC826的Datasheet PDF文件第2页浏览型号MIC826的Datasheet PDF文件第3页浏览型号MIC826的Datasheet PDF文件第4页浏览型号MIC826的Datasheet PDF文件第5页浏览型号MIC826的Datasheet PDF文件第6页浏览型号MIC826的Datasheet PDF文件第7页 
MIC826  
Voltage Supervisor with Watchdog Timer,  
Manual Reset, and Dual Outputs  
Features  
General Description  
• Precision 1.8V to 5V Power Supply Monitor  
• ±0.5% Threshold Accuracy at TA = +25°C  
The MIC826 is a low-current, ultra-small, voltage  
supervisor with manual reset input, watchdog timer,  
and active-high and active-low push-pull outputs. The  
reset outputs are asserted and held when the supply  
voltage falls below the factory-programmed threshold  
voltage, when the /MR pin is pulled low, or if the  
watchdog times out. Reset is asserted for the reset  
timeout delay after the supply voltage increases above  
the rising threshold voltage or when manual reset input  
is asserted high.  
• ±1.5% Threshold Accuracy from TA = –40°C to  
+125°C  
• 3.8 µA Supply Current (MIC826S/R/T/W/Y/Z)  
• 4.8 µA Supply Current (MIC826L/M)  
• Manual Reset Input  
• 140 ms (min.) Reset Timeout Period  
• 1.6s (typ.) Watchdog Timeout Period  
The MIC826 features an integrated pull-up resistor on  
the /MR. An active-low push-pull reset output (/RESET)  
and an active-high reset output (RESET) provide  
• Float Watchdog Timer Input to Disable Watchdog  
Timer  
• Active-High and Active-Low Push-Pull Outputs  
• Ensured Reset Output Valid to VCC = 1V  
• –40°C to +125°C Junction Temperature Range  
flexibility  
when  
interfacing  
with  
various  
microcontrollers, PMICs, or load switches. The  
watchdog input can be left unconnected for  
applications that do not require watchdog monitoring.  
• 6-Lead 1.6 mm x 1.6 mm x 0.5 mm UDFN  
Package  
The MIC826 consumes a quiescent current of only  
3.8 µA and is offered in a tiny, space-saving, 6-lead  
1.6 mm x 1.6 mm UDFN package. It is rated for the  
–40°C to +125°C temperature range.  
• 50% Smaller Version of MAX823/MAX824/  
MAX825/ADM823/ADM824/ADM825  
• 8x Lower Watchdog Input Current than the  
Competition  
Applications  
Package Type  
• Microprocessor Systems  
• Computers  
MIC826  
6-Lead 1.6 mm x 1.6 mm UDFN (MT)  
(Top View)  
• Intelligent Instruments  
1
2
3
6
5
4
/RESET  
GND  
VCC  
/MR  
WDI  
EP  
RESET  
2022 Microchip Technology Inc. and its subsidiaries  
DS20006668A-page 1  

与MIC826相关器件

型号 品牌 获取价格 描述 数据表
MIC826LYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826MYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826RYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826SYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826TYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826WYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826YYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC826ZYMT MICREL

获取价格

Voltage Supervisor with Watchdog Timer,Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDF
MIC833 MICREL

获取价格

Comparator and Reference with Adj. Hystersis Advance Information
MIC833 MICROCHIP

获取价格

The MIC833 is a micropower precision dual voltage comparator with an on-chip reference and