MIC5365/6
High Performance Single 150mA LDO
General Description
Features
• Tiny 1mm x 1mm Thin MLF® and SC-70-5 packages
• Input voltage range: 2.5V to 5.5V
• 150mA guaranteed output current
• Stable with 1µF ceramic output capacitors
• Low dropout voltage – 155mV @ 150mA
• Excellent Load/Line Transient Response
• Low quiescent current – 29µA
The MIC5365/6 is an advanced general purpose linear
regulator offering high power supply rejection (PSRR) in
an ultra-small 1mm x 1mm package. The MIC5366
includes an auto-discharge feature that is activated when
the enable pin is low. The MIC5365/6 is capable of
sourcing 150mA output current and offers high PSRR
making it an ideal solution for any portable electronic
application.
Ideal for battery powered applications, the MIC5365/6
offers 2% initial accuracy, low dropout voltage (155mV @
150mA), and low ground current (typically 29µA). The
MIC5365/6 can also be put into a zero-off-mode current
state, drawing virtually no current when disabled.
• High PSRR – 70dB
• Output discharge circuit – MIC5366
• High output accuracy
–
±2% initial accuracy
The MIC5365/6 is available in several advanced packages
including a lead-free (RoHS compliant) 1mm x 1mm Thin
MLF® occupying only 1mm2 of PCB area, a 75% reduction
in board area compared to SC-70 and 2mm x 2mm MLF®
packages. It is also availabe in an SC-70-5 package.
• Thermal shutdown and current limit protection
Applications
• Mobile phones
The MIC5365/6 has an operating junction temperature
range of –40°C to 125°C.
• Digital cameras
• GPS, PDAs, PMP, handhelds
• Portable electronics
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
___________________________________________________________________________________________________________
Typical Application
MIC5365/6-xxYMT
- Proc I/O
- Vibrator motor
- Rx/Synth
VIN
EN
VOUT
1µF
1µF
VBAT
GND
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-090109-C
September 2009