MIC5022
Micrel, Inc.
MIC5022
Half-Bridge MOSFET Driver
Not Recommended for New Designs
General Description
Features
The MIC5022 half-bridge MOSFET driver is designed to
operate at frequencies up to 100kHz (5kHz PWM for 2%
to 100% duty cycle) and is an ideal choice for high speed
applications such as motor control and SMPS (switch mode
power supplies).
• 12V to 36V operation
• 600ns rise time into 1000pF (high side)
• TTL compatible input with internal pull-down resistor
• Outputs interlocked to prevent cross conduction
• TTL compatible enable
• Fault output indication
• Individual overcurrent limits
• Gate protection
• Internal charge pump (high-side)
• Current source drive scheme reduces EMI
Arising or falling edge on the input results in a current source
pulse or sink pulse on the gate outputs. This output current
pulse can turn on a 2000pF MOSFET in approximately 1µs.
The MIC5022 then supplies a limited current (< 2mA), if
necessary, to maintain the output states.
Two overcurrent comparators with nominal trip voltages of
50mV make the MIC5022 ideal for use with current sensing
MOSFETs. External low value resistors may be used instead
of sensing MOSFETs for more precise overcurrent control.
Optional external capacitors placed on the C and C pins
Applications
• Motor control
• Switch-mode power supplies
TH
TL
may be used to individually control the current shutdown duty
cycles from approximately 20% to <1%. Duty cycles from
20%toabout75%arepossiblewithindividualpull-upresistors
from C and C to V . An open collector output provides
Ordering Information
TL
TH
DD
Part Number
MIC5022BWM
MIC5022BN
Temperature Range
Package
a fault indication when either sense input is tripped.
–40°C to +85°C
16-pin Wide SOIC
14-pin Plastic DIP
The MIC5022 is available in 16-pin wide SOIC and 14-pin
plastic DIP packages.
–40°C to +85°C
Other members of the MIC502x family include the MIC5020
low-side driver and the MIC5021 high-side driver.
Typical Application
+12V to +36V
MIC5022
1
VDD
14
13
12
11
10
9
VBOOST
10µF
2
TTL Input
Input
Gate H
2.7nF
M
(PWM signal)
3
4
5
6
7
Fault Sense H–
RS1
CTH
Sense H+
Gate L
CTH
CTL
Enable
CTL
Sense L–
Sense L+
RS2
8
Gnd
DC Motor Control Application
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 944-0970 • http://www.micrel.com
July 2005
1
MIC5022