5秒后页面跳转
MIC2298 PDF预览

MIC2298

更新时间: 2024-11-14 04:59:07
品牌 Logo 应用领域
麦瑞 - MICREL 驱动器
页数 文件大小 规格书
13页 423K
描述
3.5A Minimum, 1MHz Boost High Brightness White LED Driver

MIC2298 数据手册

 浏览型号MIC2298的Datasheet PDF文件第2页浏览型号MIC2298的Datasheet PDF文件第3页浏览型号MIC2298的Datasheet PDF文件第4页浏览型号MIC2298的Datasheet PDF文件第5页浏览型号MIC2298的Datasheet PDF文件第6页浏览型号MIC2298的Datasheet PDF文件第7页 
MIC2298  
3.5A Minimum, 1MHz Boost High  
Brightness White LED Driver  
General Description  
Features  
The MIC2298 is a high power boost-switching regulator  
that is optimized for constant-current control. The MIC2298  
is capable of driving up to 2 series 1A white LED for  
photoflash, flashlight and other applications. The feedback  
voltage is only 200mV, minimizing ballast power dissipa-  
tion in constant-current control applications for improved  
operating efficiency.  
3.5A minimum switch current delivers at least 7W of  
output power over-temperature  
200mV ±10% feedback voltage  
2.5V to 10V input voltage  
Output voltage up to 30V (max)  
12-pin 3mm x 3mm leadless MLF® package  
Available output over-voltage protection (OVP)  
1MHz operation  
Programmable output current  
<1% line regulation  
1µA shutdown current  
The MIC2298 has a brightness pin that allows for a  
programmable torch mode as well full flash with a single  
pin when driving high current LEDs.  
The MIC2298 implements a constant frequency 1MHz  
PWM control scheme to make the smallest possible  
design.  
Over temperature protection  
Externally programmable soft-start  
Under-voltage lockout (UVLO)  
–40°C to +125°C junction temperature range  
The 2.5V to 10V input voltage range of MIC2298 allows  
direct operation from 1- and 2-cell Li Ion as well as 3- to 6-  
cell NiCad/NiMH/Alkaline battery sources. Maximum  
battery life is assured with a low 1µA shutdown current.  
The MIC2298 is available in a low profile 12-pin 3x3 MLF®  
package.  
Applications  
Data sheets and support documentation can be found on  
Micrel’s web site at www.micrel.com.  
Cell phones  
PDAs  
Digital cameras  
White LED flashlights  
___________________________________________________________________________________________________________  
Typical Application  
Figure 1. High Power White LED Driver  
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.  
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com  
M9999-101707-B  
October 2007  

与MIC2298相关器件

型号 品牌 获取价格 描述 数据表
MIC2298_11 MICREL

获取价格

3.5A Minimum, 1MHz Boost High Brightness White LED Driver
MIC229815YML MICROCHIP

获取价格

LED DISPLAY DRIVER, DSO12
MIC2298-15YML MICREL

获取价格

3.5A Minimum, 1MHz Boost High Brightness White LED Driver
MIC2298-15YMLTR MICREL

获取价格

LED DISPLAY DRIVER, QCC12, 3 X 3 MM, GREEN, MLF-12
MIC2299 MICREL

获取价格

3.5A Minimum, 2MHz High Brightness LED Driver
MIC2299 MICROCHIP

获取价格

The MIC2299 is a high power boost-switching regulator that is optimized for constant-curre
MIC2299_11 MICREL

获取价格

3.5A Minimum, 2MHz High Brightness LED Driver
MIC2299-15YML MICREL

获取价格

3.5A Minimum, 2MHz High Brightness LED Driver
MIC2299-15YML-TR MICROCHIP

获取价格

LED DISPLAY DRIVER, QCC12
MIC23030 MICREL

获取价格

8MHz PWM 400mA Buck Regulator with HyperLight Load