DATA-SHEET
MCS3AO
3-element colour sensor – TO5 with optics
FUNCTION
The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried
out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes
allows signal frequencies up to MHz-range. In order to achieve a small cross talk between
the photodiodes the individual sectors were separated from each other by additional
structures. Each of these photodiodes is sensitised with dielectric spectral filter for its
colour range, preferably for the primary colours red, green and blue.
APPLICATION
•
•
•
•
Quality control
Monitoring the production
Control of manufacturing
Detection of colour marks
FEATURES
Dielectric filters guaranties the good optical properties
of the colour sensors, such as:
−
−
−
−
−
−
high transmission
slight aging of the filter
high temperature stability
high signal frequency
reduced cross talk
small size (diameter of the optical sensitive surface
ca. 2 mm)
CONSTRUCTION
•
•
•
•
3 on chip integrated PIN photo diodes
package version TO5, with optical lense
dielectric filters for the three colour ranges: red, green and blue
Electrical connections
−
−
three anodes
one common cathode
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 (0)8142 28640, Fax: +49 (0)8142 286411, info@lasercomponents.com
USA: LASER COMPONENTS Instrument Group Inc., Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk