5秒后页面跳转
MCP79402-I/SN PDF预览

MCP79402-I/SN

更新时间: 2024-11-21 19:50:31
品牌 Logo 应用领域
美国微芯 - MICROCHIP 时钟光电二极管外围集成电路
页数 文件大小 规格书
62页 860K
描述
REAL TIME CLOCK, PDSO8, 3.90 MM, ROHS COMPLIANT, PLASTIC, SOP-8

MCP79402-I/SN 技术参数

是否Rohs认证: 符合生命周期:Active
零件包装代码:SOIC包装说明:SOP, SOP8,.25
针数:8Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:0.85最大时钟频率:0.4 MHz
外部数据总线宽度:信息访问方法:I2C
中断能力:YJESD-30 代码:R-PDSO-G8
JESD-609代码:e3长度:4.9 mm
湿度敏感等级:3端子数量:8
计时器数量:1最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装等效代码:SOP8,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):260电源:2/5 V
认证状态:Not Qualified筛选级别:TS 16949
座面最大高度:1.75 mm子类别:Timer or RTC
最大供电电压:5.5 V最小供电电压:1.8 V
标称供电电压:2.5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn) - annealed端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
最短时间:SECONDS处于峰值回流温度下的最长时间:40
易失性:NO宽度:3.9 mm
uPs/uCs/外围集成电路类型:TIMER, REAL TIME CLOCKBase Number Matches:1

MCP79402-I/SN 数据手册

 浏览型号MCP79402-I/SN的Datasheet PDF文件第2页浏览型号MCP79402-I/SN的Datasheet PDF文件第3页浏览型号MCP79402-I/SN的Datasheet PDF文件第4页浏览型号MCP79402-I/SN的Datasheet PDF文件第5页浏览型号MCP79402-I/SN的Datasheet PDF文件第6页浏览型号MCP79402-I/SN的Datasheet PDF文件第7页 
MCP79400/MCP79401/MCP79402  
Battery-Backed I2C Real-Time Clock/Calendar with  
SRAM and Protected EEPROM  
Device Selection Table  
Operating Ranges  
• 2-Wire Serial Interface, I2C Compatible:  
- I2C clock rate up to 400 kHz  
Temperature Range:  
Part Number  
MCP79400  
Protected EEPROM  
Unprogrammed  
EUI-48™  
MCP79401  
MCP79402  
- Industrial (I): -40°C to +85°C  
EUI-64™  
Packages  
Timekeeping Features  
• 8-Lead SOIC, MSOP, TSSOP and 2x3 TDFN  
General Description  
• Real-Time Clock/Calendar (RTCC):  
- Hours, Minutes, Seconds, Day of Week, Day,  
Month, Year  
The MCP7940X Real-Time Clock/Calendar (RTCC)  
tracks time using internal counters for hours, minutes,  
seconds, days, months, years, and day of week.  
Alarms can be configured on all counters up to and  
including months. For usage and configuration, the  
MCP7940X supports I2C communications up to  
400 kHz.  
- Leap year compensated to 2399  
- 12/24-hour modes  
• Oscillator for 32.768 kHz Crystals:  
- Optimized for 6-9 pF crystals  
• On-Chip Digital Trimming/Calibration:  
- ±1 ppm resolution  
The open-drain, multi-functional output can be  
configured to assert on an alarm match, to output a  
selectable frequency square wave or as a general  
purpose output.  
- ±129 ppm  
• Dual Programmable Alarms  
• Versatile Output Pin:  
The MCP7940X is designed to operate using a  
32.768 kHz tuning fork crystal with external crystal  
load capacitors. On-chip digital trimming can be used  
to adjust for frequency variance caused by crystal  
tolerance and temperature.  
- Clock output with selectable frequency  
- Alarm output  
- General purpose output  
• Power-Fail Time-Stamp:  
- Time logged on switchover to and from  
Battery mode  
SRAM and timekeeping circuitry are powered from the  
back-up supply when main power is lost, allowing the  
device to maintain accurate time and the SRAM  
contents. The times when the device switches over to  
the back-up supply and when primary power returns  
are both logged by the power-fail time-stamp.  
Low-Power Features  
• Wide Voltage Range:  
- Operating voltage range of 1.8V to 5.5V  
- Backup voltage range of 1.3V to 5.5V  
• Low Typical Timekeeping Current:  
- Operating from VCC: 1.2 µA at 3.3V  
The MCP7940X features 64 bits of EEPROM which is  
only writable after an unlock sequence, making it ideal  
for storing a unique ID or other critical information. The  
MCP79401 and MCP79402 are pre-programmed with  
EUI-48 and EUI-64 addresses, respectively. Custom  
programming is also available.  
- Operating from battery backup: 925 nA at  
3.0V  
Package Types  
• Automatic Switchover to Battery Backup  
User Memory  
SOIC, TSSOP, MSOP  
TDFN  
• 64-Byte Battery-Backed SRAM  
• 64-Bit Protected EEPROM Area:  
- Robust write unlock sequence  
- EUI-48MAC address (MCP79401)  
- EUI-64MAC address (MCP79402)  
- Custom programming available  
X1  
X2  
1
2
3
8
7
6
VCC  
MFP  
SCL  
X1 1  
X2 2  
8
7
6
5
VCC  
MFP  
SCL  
SDA  
VBAT  
VSS  
3
4
V
BAT  
VSS  
4
5
SDA  
2011-2016 Microchip Technology Inc.  
DS20005009F-page 1  

MCP79402-I/SN 替代型号

型号 品牌 替代类型 描述 数据表
MCP79401-I/ST MICROCHIP

完全替代

REAL TIME CLOCK, PDSO8, 4.40 MM, ROHS COMPLIANT, PLASTIC, TSSOP-8

与MCP79402-I/SN相关器件

型号 品牌 获取价格 描述 数据表
MCP79402-I/ST MICROCHIP

获取价格

Battery-Backed I2C Real-Time Clock/Calendar with SRAM and Protected EEPROM
MCP79402T-I/MNY MICROCHIP

获取价格

REAL TIME CLOCK, PDSO8, 2 X 3 MM, 0.75 MM WIDTH, ROHS COMPLIANT, PLASTIC, TDFN-8
MCP79402T-I/ST MICROCHIP

获取价格

Battery-Backed I2C Real-Time Clock/Calendar with SRAM and Protected EEPROM
MCP7940M MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with
MCP7940M-I MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with
MCP7940M-I/SN MICROCHIP

获取价格

REAL TIME CLOCK
MCP7940MIMNY MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with
MCP7940MIMS MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with
MCP7940MIP MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with
MCP7940MISN MICROCHIP

获取价格

Low-Cost I2C™ Real-Time Clock/Calendar with