MCP631/2/3/4/5/9
24 MHz, 2.5 mA Rail-to-Rail Output (RRO) Op Amps
Features:
Description:
• Gain-Bandwidth Product: 24 MHz
• Slew Rate: 10 V/µs
The Microchip Technology Inc. MCP631/2/3/4/5/9
family of operational amplifiers features high gain
bandwidth product (24 MHz, typical) and high output
short-circuit current (70 mA, typical). Some also
provide a Chip Select (CS) pin that supports a
low-power mode of operation. These amplifiers are
optimized for high speed, low noise and distortion,
single-supply operation with rail-to-rail output and an
input that includes the negative rail.
• Noise: 10 nV/Hz at 1 MHz)
• Low Input Bias Current: 4 pA (typical)
• Ease of Use:
- Unity-Gain Stable
- Rail-to-Rail Output
- Input Range including Negative Rail
- No Phase Reversal
This family is offered in single (MCP631), single with
CS pin (MCP633), dual (MCP632), dual with two CS
pins (MCP635), quad (MCP634) and quad with two
Chip Select pins (MCP639). All devices are fully
specified from -40°C to +125°C.
• Supply Voltage Range: +2.5V to +5.5V
• High Output Current: ±70 mA
• Supply Current: 2.5 mA/ch (typical)
• Low-Power Mode: 1 µA/ch
• Small Packages: SOT23-5, DFN
• Extended Temperature Range: -40°C to +125°C
Typical Application Circuit
MCP63X
0A – 20 A
Typical Applications:
+5V
• Fast Low-Side Current Sensing
• Point-of-Load Control Loops
• Power Amplifier Control Loops
• Barcode Scanners
51.1
+
VOUT
-
0V – 4V
0.005
• Optical Detector Amplifier
• Multi-Pole Active Filter
51.1
2.0 k
Design Aids:
• SPICE Macro Models
• FilterLab® Software
• Microchip Advanced Part Selector (MAPS)
• Analog Demonstration and Evaluation Boards
• Application Notes
High Gain-Bandwidth Op Amp Portfolio
Model Family
Channels/Package
Gain-Bandwidth
VOS (max.)
IQ/Ch (typ.)
MCP621/1S/2/3/4/5/9
MCP631/2/3/4/5/9
1, 2, 4
1, 2, 4
20 MHz
24 MHz
50 MHz
60 MHz
0.2 mV
8.0 mV
0.2 mV
8.0 mV
2.5 mA
2.5 mA
6.0 mA
6.0 mA
MCP651/1S/2/3/4/5/9
MCP660/1/2/3/4/5/9
1, 2, 4
1, 2, 3, 4
2009-2014 Microchip Technology Inc.
DS20002197C-page 1