MCP2021A/2A
LIN Transceiver with Voltage Regulator
Features:
Description:
• The MCP2021A/2A are compliant with LIN Bus
Specifications Version 1.3, 2.1 and with SAE
J2602-2
The MCP2021A/2A provide a bidirectional, half-duplex
communication physical interface to meet the LIN bus
specification Revision 2.1 and SAE J2602-2. The
devices incorporate a voltage regulator with 5V or 3.3V
at 70 mA regulated power supply output. The devices
have been designed to meet the stringent quiescent
current requirements of the automotive industry and
will survive +43V load dump transients and double
battery jumps.
• Support Baud Rates up to 20 kBaud
• 43V Load Dump Protected
• Maximum Continuous Input Voltage: 30V
• Wide LIN-Compliant Supply Voltage: 6.0 – 18.0V
• Extended Temperature Range: -40 to +125°C
• Interface to PIC® MCU EUSART and Standard
USARTs
Package Types
• Wake-Up on LIN Bus Activity or Local Wake Input
• Local Interconnect Network (LIN) Bus Pin:
MCP2021A
PDIP, SOIC
- Internal Pull-Up Termination Resistor and
Diode for Slave Node
FAULT/TXE
1
2
3
4
8
7
6
5
RXD
VBB
LBUS
VSS
CS/LWAKE
VREG
- Protected Against VBAT Shorts
- Protected Against Loss of Ground
- High-Current Drive
TXD
• TXD and LIN Bus Dominant Time-Out Function
• Two Low-Power Modes:
MCP2021A
4x4 DFN
- Transmitter Off: 90 µA (typical)
- Power Down: 4.5 µA (typical)
RXD
FAULT/TXE
VBB
1
8
7
6
5
CS/LWAKE
VREG
2
3
4
EP
9
• Output Indicating Internal Reset State (POR or
Sleep Wake)
LBUS
TXD
VSS
• MCP2021A/2A On-Chip Voltage Regulator:
- Output Voltage of 5.0V or 3.3V
at 70 mA Capability with Tolerances of ±3%
Over the Temperature Range
MCP2022A
PDIP, SOIC, TSSOP
RXD
- Internal Short Circuit Current Limit
1
2
3
4
5
6
7
14
13
12
11
10
9
FAULT/TXE
VBB
- External Components Limited to Filter
Capacitor and Load Capacitor
CS/LWAKE
VREG
LBUS
VSS
• Automatic Thermal Shutdown
TXD
• High Electromagnetic Immunity (EMI), Low
Electromagnetic Emission (EME)
RESET
NC
NC
NC
NC
• Robust ESD Performance: ±15 kV for LBUS and
VBB pin (IEC61000-4-2)
NC
8
* Includes Exposed Thermal Pad (EP), see Table 1-2.
• Transient Protection for LBUS and VBB Pins in
Automotive Environment (ISO7637)
• Meets Stringent Automotive Design
Requirements, including “OEM Hardware
Requirements for LIN, CAN and FlexRay
Interfaces in Automotive Applications”, Version
1.2, March 2011
• Multiple Package Options, including Small
4x4 mm DFN Package
2012-2014 Microchip Technology Inc.
DS20002298C-page 1