Document Number: MC15XS3400
Rev. 10.0, 05/2012
Freescale Semiconductor
Technical Data
Quad High Side Switch
(Quad 15 mOhm)
15XS3400
The 15XS3400 is one in a family of devices designed for low-voltage
automotive lighting applications. Its four low RDS(ON) MOSFETs (quad
15 mOhm) can control four separate 55 W/28 W bulbs, and/or Xenon
modules, and/or LEDs.
HIGH SIDE SWITCH
Programming, control and diagnostics are accomplished using a
16-bit SPI interface. Its output with selectable slew rate improves
electromagnetic compatibility (EMC) behavior. Additionally, each
output has its own parallel input or SPI control for pulse-width
modulation (PWM) control. The 15XS3400 allows the user to program
via the SPI the fault current trip levels and duration of acceptable lamp
inrush. The device has Fail-safe mode to provide functionality of the
outputs in case of MCU damage.
Features
FK SUFFIX
98ARL10596D
24-PIN PQFN
• Four protected 15 mΩ high side switches (at 25 °C)
• Operating voltage range of 6.0 V to 20 V with standby current
< 5.0 μA, extended mode from 4.0 V to 28 V
• 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting
with daisy chain capability
ORDERING INFORMATION
• PWM module using external clock or calibratable internal
oscillator with programmable outputs delay management
• Smart over-current shutdown, severe short-circuit, over-
temperature protection with time limited autoretry, and Fail-safe
mode in case of MCU damage
Device
(For Tape and Reel,
add an R2 Suffix)
Temperature
Package
Range (T )
A
MC15XS3400CHFK
MC15XS3400DHFK
-40°C to 125°C
24 PQFN
• Output OFF or ON open-load detection compliant to bulbs or
LEDs and short to battery detection
• Analog current feedback with selectable ratio and board
temperature feedback
V
V
V
V
V
PWR
DD
DD
PWR
DD
15XS3400
VDD
VPWR
HS0
WAKE
FS
LOAD
I/O
SCLK
CS
SCLK
CS
SO
RST
SI
IN0
IN1
IN2
IN3
CSNS
FSI
HS1
HS2
HS3
SI
LOAD
LOAD
LOAD
I/O
SO
I/O
I/O
I/O
MCU
I/O
A/D
GND
GND
Figure 1. 15XS3400 Simplified Application Diagram
Freescale Semiconductor, Inc. reserves the right to change the detail specifications,
as may be required, to permit improvements in the design of its products.
© Freescale Semiconductor, Inc., 2008 - 2012. All rights reserved.