MBR25xxCT, MBRF25xxCT, MBRB25xxCT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
FEATURES
TO-220AB
ITO-220AB
• Power pack
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
3
3
2
• Meets MSL level 1, per J-STD-020, LF maximum peak of
2
1
245 °C (for D2PAK (TO-263AB) package)
1
MBR25xxCT
MBRF25xxCT
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
PIN 1
PIN 2
CASE
PIN 1
PIN 2
PIN 3
PIN 3
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3_A
D2PAK (TO-263AB)
K
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
2
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
1
MBRB25xxCT
PIN 1
K
PIN 2
HEATSINK
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, D2PAK (TO-263AB)
Epoxy meets UL 94 V-0 flammability rating
PRIMARY CHARACTERISTICS
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code, e.g. A, B, ...)
IF(AV)
VRRM
IFSM
2 x 12.5 A
35 V, 45 V
150 A
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
VF
0.73 V at 30 A
TJ max.
150 °C
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
TO-220AB, ITO-220AB, D2PAK
(TO-263AB)
Package
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
Circuit configuration
Common cathode
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VRRM
MBR2535CT
MBR2545CT
UNIT
Maximum repetitive peak reverse voltage
Working peak reverse voltage
35
35
35
45
45
45
VRWM
VDC
V
Maximum DC blocking voltage
total device
per diode
25
Maximum average forward rectified current
at TC = 130 °C
IF(AV)
A
12.5
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode
IFSM
IRRM
ERSM
VC
150
1.0
25
A
Peak repetitive reverse surge current per diode
at tp = 2 μs, 1 kHz
Peak non-repetitive reverse energy (8/20 μs waveform)
per diode
mJ
Electrostatic discharge capacitor voltage human body model: C = 100 pF,
R = 1.5 kΩ
25
kV
Voltage rate of change (rated VR)
dV/dt
TJ
10 000
V/μs
Operating junction temperature range
-65 to +150
-65 to +175
1500
°C
V
Storage temperature range
TSTG
VAC
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
Revision: 14-Jun-17
Document Number: 88675
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000