MBRA140T3
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERES
40 VOLTS
Features
• Small Compact Surface Mountable Package with J−Bent Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
MARKING
DIAGRAM
B14
AYWW G
SMA
CASE 403D
PLASTIC
• Guardring for Stress Protection
• Pb−Free Package is Available
Mechanical Characteristics
A
Y
WW
G
= Assembly Location
= Year
= Work Week
• Case: Epoxy, Molded
• Weight: 70 mg (approximately)
= Pb−Free Package
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
ORDERING INFORMATION
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
†
Device
Package
Shipping
• Shipped in 12 mm tape, 5000 units per 13 inch reel
MBRA140T3
SMA
5000 / Tape & Reel
5000 / Tape & Reel
• Polarity: Cathode Lead Indicated by Either Notch in Plastic Body
MBRA140T3G
SMA
(Pb−Free)
or Polarity Band
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2008
1
Publication Order Number:
May, 2008 − Rev. 8
MBRA140T3/D