EVALUATION KIT AVAILABLE
MAX9930–MAX9933
2MHz to 1.6GHz 45dB RF-Detecting
Controllers and RF Detector
General Description
Features
●
The MAX9930–MAX9933 low-cost, low-power logarithmic
amplifiers are designed to control RF power amplifiers
(PA) and transimpedance amplifiers (TIA), and to detect
RF power levels. These devices are designed to operate
in the 2MHz to 1.6GHz frequency range. A typical dynam-
ic range of 45dB makes this family of logarithmic ampli-
fiers useful in a variety of wireless and GPON fiber video
applications such as transmitter power measurement, and
RSSI for terminal devices. Logarithmic amplifiers provide
much wider measurement range and superior accuracy to
controllers based on diode detectors. Excellent tempera-
ture stability is achieved over the full operating range of
-40°C to +85°C.
Complete RF-Detecting PA Controllers
(MAX9930/MAX9931/MAX9932)
●
●
Complete RF Detector (MAX9933)
Variety of Input Ranges
MAX9930/MAX9933: -58dBV to -13dBV
(-45dBm to 0dBm for 50Ω Termination)
MAX9931: -48dBV to -3dBV
(-35dBm to +10dBm for 50Ω Termination)
MAX9932: -43dBV to +2dBV
(-30dBm to +15dBm for 50Ω Termination)
●
●
●
●
●
●
●
2MHz to 1.6GHz Frequency Range
Temperature Stable Linear-in-dB Response
Fast Response: 70ns 10dB Step
10mA Output Sourcing Capability
Low Power: 17mW at 3V (typ)
The choice of three different input voltage ranges elimi-
nates the need for external attenuators, thus simplifying
PA control-loop design. The logarithmic amplifier is a
voltage-measuring device with a typical signal range of
-58dBV to -13dBV for the MAX9930/MAX9933, -48dBV
to -3dBV for the MAX9931, and -43dBV to +2dBV for the
MAX9932.
13μA (typ) Shutdown Current
Available in a Small 8-Pin μMAX Package
The MAX9930–MAX9933 require an external coupling
capacitor in series with the RF input port. These devices
feature a power-on delay when coming out of shutdown,
holding OUT low for approximately 2.5μs to ensure
glitch-free controller output.
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
8 µMAX
MAX9930EUA+T
MAX9931EUA+T
MAX9932EUA+T
MAX9933EUA+T
MAX9933BGUA+T
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +105°C
8 µMAX
The MAX9930–MAX9933 family is available in an 8-pin
8 µMAX
®
μMAX package. These devices consume 7mA with a
8 µMAX
5V supply, and when powered down, the typical shut-
down current is 13μA.
8 µMAX
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Applications
●
●
●
●
●
RSSI for Fiber Modules, GPON-CATV Triplexors
Low-Frequency RF OOK and ASK Applications
Transmitter Power Measurement and Control
TSI for Wireless Terminal Devices
Pin Configurations
TOP VIEW
Cellular Handsets (TDMA, CDMA, GPRS, GSM)
+
+
RFIN
SHDN
SET
1
2
3
4
8
7
6
5
V
RFIN
SHDN
GND
1
2
3
4
8
7
6
5
V
CC
CC
MAX9930
MAX9931
MAX9932
OUT
N.C.
GND
OUT
N.C.
GND
MAX9933
MAX9933B
Block Diagram appears at end of data sheet.
CLPF
CLPF
µMAX
µMAX
μMAX is a registered trademark of Maxim Integrated Products, Inc.
19-0859; Rev 2; 3/15