Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
Ultra-Small, nanoPower Single
Comparators in 4-Bump UCSP and 5 SOT23
MAX9060–MAX9064
General Description
Features
● Tiny 1mm x 1mm x 0.6mm 4-Bump UCSP
The MAX9060–MAX9064 are small single comparators,
ideal for a wide variety of portable electronics applications
such as cell phones, media players, and notebooks that
have extremely tight board space and power constraints.
These comparators are offered in both, a miniature
4-bump UCSP™ package with a 1mm x 1mm footprint (as
small as two 0402 resistors), and a 5-pin SOT23 package.
● Footprint = Two 0402 Resistors
● Also Available in a 5-Pin SOT23 Package
● Ultra-Low Operating Current (100nA max)
● Input Voltage Range = -0.3V to +5.5V
● External REF Range = 0.9V to 5.5V
(MAX9060/MAX9061)
The MAX9060–MAX9064 feature an input voltage range
of -0.3V to +5.5V independent of supply voltage. These
devices maintain high impedance at the inputs even when
● Internal REF Voltage = 0.2V
(MAX9062/MAX9063/MAX9064)
powered down (V
or V
= 0V). They also feature
● 15μs Propagation Delay
CC
REF
internal filtering to provide high RF immunity.
● -40°C to +85°C Extended Temperature Range
The MAX9060 and MAX9061 have open-drain outputs and
draw quiescent supply current from a user-supplied refer-
Ordering Information
PART
PIN PACKAGE
TOP MARK
AFX
ence voltage, V , between 0.9V and 5.5V. These devic-
REF
MAX9060EBS+G45
MAX9060EUK+
4 UCSP
es consume only 100nA (max) supply current and operate
over the extended -40°C to +85°C temperature range.
5 SOT23
4 UCSP
AFFG
AFY
MAX9061EBS+G45
MAX9061EUK+
The MAX9062, MAX9063 and MAX9064 are single com-
parators with an internal 0.2V reference. These devices
feature either a push-pull or an open-drain output. They
consume only 700nA(max) supply current. The MAX9062,
5 SOT23
4 UCSP
AFFH
AFZ
MAX9062EBS+G45
MAX9062EUK+
5 SOT23
4 UCSP
AFFI
MAX9063, and MAX9064 operate down to V
= 1V over
MAX9063EBS+G45
MAX9063EUK+
AFA
CC
the extended -40°C to +85°C temperature range.
5 SOT23
5 SOT23
4 UCSP
AFFJ
+AMGH
AFB
Applications
● Cell Phones
● Portable Media Players
● Electronic Toys
● Notebook Computers
● Portable Medical Devices
MAX9063EUK/V+T
MAX9064EBS+G45
MAX9064EUK+
5 SOT23
AFFK
Note: All devices are specified over the extended -40°C
to+85°C operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified device.
T = Tape and reel.
Selector Guide and Typical Operating Circuits appears at
end of data sheet.
G45 = Protective die coating.
UCSP is a trademark of Maxim Integrated Products, Inc.
Pin Configurations
TOP VIEW (BUMPS ON BOTTOM)
+
REF
(V
1
2
5
OUT
)
CC
OUT
A1
A2
IN
MAX9060–
MAX9064
GND
GND
MAX9060–MAX9064
REF
B1
B2
GND
(V
)
CC
3
4
IN
REF = MAX9060/MAX9061
(V ) = MAX9062–MAX9064
UCSP
SOT23
CC
19-4105; Rev 9; 8/20
©
2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2021 Analog Devices, Inc. All rights reserved.
|
|