EVALUATION KIT AVAILABLE
MAX8900A/MAX8900B/MAX8900C
1.2A Switch-Mode Li+ Chargers with 22ꢀ ꢁInpt
RatiIg aId JEꢁTA Battery Temneratpre MoIitoriIg
GeIeral DescrintioI
Featpres
S 3.25MHz Switching Li+/Li-Poly Battery Charger
The MAX8900_ is a high-frequency, switch-mode char-
ger for a 1-cell lithium ion (Li+) or lithium polymer
(Li-Poly) battery. It delivers up to 1.2A of current to the
battery from 3.4V to 6.3V (MAX8900A/MAX8900C) or
3.4V to 8.7V (MAX8900B). The 3.25MHz switch-mode
charger is ideally suited to small portable devices such
as headsets and ultra-portable media players because it
minimizes component size and heat.
S JEITA Battery Temperature Monitor Adjusts
Charge Current and Termination Voltage
S 4.2V ±±.5ꢀ Battery ꢁegulation Voltage ꢂAlternate
4.1V Target Available on ꢁequest)
S Adjustable Done Current Threshold
Adjustable from 1±mA to 2±±mA
±1mA Accuracy at 1±mA
Several features make the MAX8900_ perfect for high-
reliability systems. The MAX8900_ is protected against
input voltages as high as +22V and as low as -22V.
Battery protection features include low voltage prequali-
fication, charge fault timer, die temperature monitoring,
and battery temperature monitoring. The battery temper-
ature monitoring adjusts the charge current and termina-
tion voltage as described in the JEITA* specification for
safe use of secondary lithium-ion batteries.
S High-Efficiency and Low Heat
S Uses a 2.±mm x 1.6mm Inductor
S Positive and Negative Input Voltage Protection
ꢂ±22V)
S Up to +2±V Operating ꢁange ꢂAlternate OVLO
ꢁanges Available on ꢁequest)
S Supports No-Battery Operation
S Fault Timer
Charge parameters are easily adjustable with external
components. An external resistance adjusts the charge
current from 50mA to 1200mA. Another external resis-
tance adjusts the prequalification and done current
thresholds from 10mA to 200mA. The done current thresh-
old is very accurate achieving Q1mA at the 10mA level.
The charge timer is adjustable with an external capacitor.
S Charge Status Outputs
S 2.44mm x 2.67mm x ±.64mm Package
Simnlified AnnlicatioIs Circpit
1FH
The MAX8900_ is available in a 0.4mm pitch, 2.44mm x
2.67mm x 0.64mm WLP package.
BST
CS
AnnlicatioIs
Digital Cameras
GPS, PND
eBook
LX
IN
BAT
USB Charging
Headsets and Media
Players
2.2FF
6.3V
0603
V
IN
(-22V TO +22V)
0.47FF
25V
0603
PGND
AVL
SYSTEM
LOAD
MAX8900_
Smartphones
STAT1
STAT2
STAT3
CEN
GND
THM
Li+/
Li-POLY
OrderiIg ꢁIformatioI (coItiIped)
OFF
TEMP PIN-
ꢁANGE PACKAGE
ON
PAꢁT
OPTIONS
T
PVL
V
= 6.5V
INBP
OVLO
1.0FF
6.3V
0.47FF
25V
CT
SETI DNI
-40NC to
30 WLP
+85NC
T1 = 0NC
MAX89±±AEWV+T
2-pin status indicators
0402
0603
V
= 2.8V
PQUTH
V
= 9.0V
OVLO
-40NC to
30 WLP
+85NC
T1 = -15NC
3-pin status indicators
MAX89±±BEWV+T
*JEITA (Japan Electronics and Information Technology
Industries Association) standard, “A Guide to the Safe Use
of Secondary Lithium Ion Batteries in Notebook-type Personal
Computers” April 20, 2007.
V
= 2.8V
PQUTH
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Ordering Information continued at end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-5063; Rev 4; 11/14