Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
Microprocessor Voltage Monitors
with Programmable Voltage Detection
MAX8211/MAX8212
General Description
Features
● μP Power-Fail Warning
The Maxim’s MAX8211 and MAX8212 are CMOS micro-
power voltage detectors that warn microprocessors (μPs)
of power failures. Each contains a comparator, a 1.15V
bandgap reference, and an open-drain n-channel output
driver. Two external resistors are used in conjunction with
the internal reference to set the trip voltage to the desired
level. A hysteresis output is also included, allowing the user
to apply positive feedback for noise-free output switching.
● Improved 2nd Source for ICL8211/ICL8212
● Low-Power CMOS Design
● 5μA Quiescent Current
● On-Board Hysteresis Output
● ±40mV Threshold Accuracy (±3.5%)
● 2.0V to 16.5V Supply-Voltage Range
● Define Output Current Limit (MAX8211)
● High Output Current Capability (MAX8212)
The MAX8211 provides a 7mA current-limited output sink
whenever the voltage applied to the threshold pin is less
than the 1.15V internal reference. In the MAX8212, a
voltage greater than 1.15V at the threshold pin turns the
output stage on (no current limit).
Ordering Information
PART
TEMP RANGE
-0°C to +70°C
-0°C to +70°C
-0°C to +70°C
-0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
PIN- PACKAGE
8 Plastic DIP
8 SO
The CMOS MAX8211/MAX8212 are plug-in replacements
for the bipolar ICL8211/ICL8212 in applications where the
maximum supply voltage is less than 16.5V. They offer
several performance advantages, including reduced sup-
ply current, a more tightly controlled bandgap reference,
and more available current from the hysteresis output.
MAX8211CPA
MAX8211CSA
MAX8211CUA
MAX8211CTY
MAX8211EPA
MAX8211ESA
MAX8211EJA
MAX8211ETY
MAX8211MJA
8 µMAX
8 TO-99
8 Plastic DIP
8 SO
8 CERDIP
8 TO-99
Applications
● μP Voltage Monitoring
● Undervoltage Detection
● Overvoltage Detection
● Battery-Backup Switching
● Power-Supply Fault Monitoring
● Low-Battery Detection
8 CERDIP**
Ordering Information continued on last page.
*Contact factory for dice specifications.
**Contact factory for availability and processing to
MIL-STD-883.
Pin Configurations
Typical Operating Circuit
V+
TOP VIEW
R3
V+
N.C.
1
8
7
6
5
V+
HYST
µ P
NMI
OUT
R2
N.C.
2
3
MAX8211
HYST
THRESH
OUT
MAX8211
MAX8212
THRESH
GND
N.C.
GND
R1
4
DIP/SO
ꢀꢁꢂꢃꢄꢅꢆꢇPPꢀꢈ ꢇꢉDꢊꢋVꢁꢀꢌAꢂꢊ Dꢊꢌꢊꢄꢌꢁꢋ
(DETAILED CIRCUIT DIAGRAM—FIGURE 5)
Pin Configurations continued at end of data sheet.
19-0539; Rev 6; 8/20
©
2020 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2021 Analog Devices, Inc. All rights reserved.
|
|