MAX809 Series,
MAX810 Series
Very Low Supply Current
3−Pin Microprocessor
Reset Monitors
The MAX809 and MAX810 are cost−effective system supervisor
circuits designed to monitor VCC in digital systems and provide a reset
signal to the host processor when necessary. No external components
are required.
http://onsemi.com
MARKING
DIAGRAM
The reset output is driven active within 10 msec of VCC falling
through the reset voltage threshold. Reset is maintained active for a
timeout period which is trimmed by the factory after VCC rises above
the reset threshold. The MAX810 has an active−high RESET output
while the MAX809 has an active−low RESET output. Both devices
are available in SOT−23 and SC−70 packages.
3
3
SOT−23
(TO−236)
CASE 318
xxx MG
G
1
1
2
2
The MAX809/810 are optimized to reject fast transient glitches on
the VCC line. Low supply current of 0.5 mA (VCC = 3.2 V) makes these
devices suitable for battery powered applications.
SC−70
(SOT−323)
CASE 419
xx MG
G
1
Features
• Precision VCC Monitor for 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V
Supplies
xxx
M
= Specific Device Code
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
• Precision Monitoring Voltages from 1.2 V to 4.9 V Available
in 100 mV Steps
• Four Guaranteed Minimum Power−On Reset Pulse Width Available
(1 ms, 20 ms, 100 ms, and 140 ms)
PIN CONFIGURATION
• RESET Output Guaranteed to V = 1.0 V.
CC
• Low Supply Current
GND
1
• Compatible with Hot Plug Applications
• VCC Transient Immunity
V
3
CC
• No External Components
• Wide Operating Temperature: −40°C to 105°C
• Pb−Free Packages are Available
RESET
RESET
2
Typical Applications
SOT−23/SC−70
(Top View)
• Computers
NOTE: RESET is for MAX809
RESET is for MAX810
• Embedded Systems
• Battery Powered Equipment
• Critical Microprocessor Power Supply Monitoring
ORDERING INFORMATION
See detailed ordering and shipping information in the package
V
CC
dimensions section on page 8 of this data sheet.
V
V
CC
CC
MAX809/810
PROCESSOR
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 8 of this data sheet.
RESET
RESET
RESET
INPUT
GND
GND
Figure 1. Typical Application Diagram
©
Semiconductor Components Industries, LLC, 2007
1
Publication Order Number:
February, 2007 − Rev. 15
MAX809S/D