EVALUATION KIT AVAILABLE
MAX7500–MAX7504
Digital Temperature Sensors and Thermal
Watchdog with Bus Lockup Protection
General Description
Features
The MAX7500–MAX7504 temperature sensors accurately
measure temperature and provide an overtemperature
alarm/interrupt/shutdown output. These devices convert
the temperature measurements to digital form using a
high-resolution, sigma-delta, analog-to-digital converter
● Timeout Prevents Bus Lockup (MAX7500, MAX7501,
MAX7502)
● Hardware Reset for Added Protection
2
● I C Bus Interface
2
● 3.0V to 5.5V Supply Voltage Range
● 250μA (typ) Operating Supply Current
● 3μA (typ) Shutdown Supply Current
(ADC). Communication is through an I C-compatible
2-wire serial interface. The MAX7500/MAX7501/MAX7502
integrate a timeout feature that offers protection against
2
I C bus lockups. The MAX7503/MAX7504 do not include
● ±1.5°C (max) Temperature Accuracy (-25°C to
the timeout feature.
+100°C, 3-σ)
The 2-wire serial interface accepts standard write byte,
read byte, send byte, and receive byte commands to read
the temperature data and configure the behavior of the
open-drain overtemperature shutdown output.
● μMAX, SO Packages Save Space
● Separate Open-Drain OS Output Operates as
Interrupt or Comparator/Thermostat Input
The MAX7500 features three address select lines, while
the MAX7501–MAX7504 feature two address select lines
and a RESET input. The MAX7500/MAX7501/MAX7502s’
3.0V to 5.5V supply voltage range, low 250μA supply
● Register Readback Capability
● Improved LM75 Second Source
2
Ordering Information/
Selector Guide
current, and a lockup-protected I C-compatible interface
make them ideal for a wide range of applications, including
personal computers (PCs), electronic test equipment, and
office electronics.
TEMP
RANGE
PIN-
PACKAGE
PART
RESET TIMEOUT
®
The MAX7500–MAX7504 are available in 8-pin μMAX
-55°C to
+125°C
and SO packages and operate over the -55°C to +125°C
temperature range.
MAX7500MSA
8 SO
—
X
Ordering Information/Selector Guide continued at end of
data sheet.
Applications
● PCs
Pin Configurations appear at end of data sheet.
● Servers
● Office Electronics
● Electronic Test Equipment
● Industrial Process Control
Typical Application Circuits
+3.0V TO +5.5V
+3.0V TO +5.5V
4.7kΩ
4.7kΩ
+V
S
+V
S
SDA
SDA
A0
A0
A1
A2
2
2
TO I C MASTER
TO I C MASTER
SCL
SCL
OS
MAX7501
MAX7502
MAX7503
MAX7504
A1
OS
MAX7500
GND
RESET
GND
μMAX is a registered trademark of Maxim Integrated Products, Inc.
19-3382; Rev 5; 11/16