Click here to ask an associate for production status of specific part numbers.
Dual Remote/Local Temperature Sensors
and Four-Channel Voltage Monitors
MAX6655/MAX6656
General Description
Features
● Three Temperature Channels
• Two Remote PN Junctions
• One Local Sensor
The MAX6655/MAX6656 are precise voltage and
temperature monitors. The digital thermometer reports
the temperature of two remote sensors and its own die
temperature. The remote sensors are diode-connected
transistors—typically a low-cost, easily mounted 2N3906
PNP type—that replace conventional thermistors or
thermocouples. Remote accuracy is ±1°C for multiple
transistor manufacturers with no calibration necessary.
The remote channels can also measure the die
temperature of other ICs, such as microprocessors,
that contain a substrate-connected PNP with its collector
grounded and its base and emitter available for temperature-
sensing purposes. The temperature is digitized with 11-bit
resolution.
● Four Voltage Channels
• +12V, +5V, +3.3V, +2.5V
• Three External Monitors
• One Internal Supply Monitor
● 11-Bit, 0.125°C Resolution
● High Accuracy: ±1°C Over +60°C to +100°C
Temperature Range
● Programmable Under/Over-Threshold Alarms
● Programmable Power-Saving Mode
● No Calibration Required
The MAX6655/MAX6656 also measure their own supply
voltage and three external voltages with 8-bit resolution.
Each voltage input’s sensitivity is set to give approximately
3/4-scale output code when the input voltage is at its nominal
value. The MAX6655 operates at +5V supply and its second
voltage monitor is 3.3V. The MAX6656 operates on a
+3.3V supply and its second voltage monitor is 5V.
2
● SMBus/I C-Compatible Interface
● OVERT Output for Fan Control and System
Shutdown
Ordering Information
PIN-
PACKAGE
PKG
CODE
PART
TEMP RANGE
The 2-wire serial interface accepts standard SMBus™
Write Byte, Read Byte, Send Byte, and Receive Byte
commands to program the alarm thresholds and to read
data. The MAX6655/MAX6656 also provide SMBus alert
response and timeout functions. The MAX6655/MAX6656
measure automatically and autonomously, with the con-
version rate programmable. The adjustable rate allows
the user to control the supply current.
MAX6655MEE -55°C to +125°C 16 QSOP
MAX6656MEE -55°C to +125°C 16 QSOP
E16-5
E16-5
Typical Application Circuit appears at end of data sheet.
Pin Configuration
In addition to the SMBus ALERT output, the MAX6655/
MAX6656 feature an OVERT output, which is used as
a temperature reset that remains active only while the
temperature is above the maximum temperature limit.
The OVERT output is optimal for fan control or for
system shutdown.
TOP VIEW
V
1
2
3
4
5
6
7
8
16 STBY
CC
DXP1
DXN1
ADD0
ADD1
DXP2
DXN2
GND
15 SMBCLK
14 OVERT
13 SMBDATA
12 ALERT
MAX6655
MAX6656
Applications
● Notebooks
● Thin Clients
● Servers
● Workstations
11
10
9
V
IN2
V
IN1
V
IN3
● Communication
Equipment
● Desktop PC
QSOP
SMBus is a trademark of Intel Corp.
19-2117; Rev 3; 3/21
©
2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2021 Analog Devices, Inc. All rights reserved.
|
|