19-2656; Rev 3; 6/10
µP Reset Circuits with Long Manual Reset
Setup Period
3–MAX6452
General Description
Features
o Single- or Dual-Supply Voltage Monitors
o Precision Factory-Set Reset Thresholds from
The MAX6443–MAX6452 low-current microprocessor
reset circuits feature single or dual manual reset inputs
with an extended setup period. Because of the extend-
ed setup period, short switch closures (nuisance resets)
are ignored.
1.6V to 4.6V
o Adjustable Threshold to Monitor Voltages Down
to 0.63V (MAX6449–MAX6452)
On all devices, the reset output asserts when any of the
monitored supply voltages drops below its specified
threshold. The reset output remains asserted for the
reset timeout period (210ms typ) after all monitored
supplies exceed their reset thresholds. The reset output
is one-shot pulse asserted for the reset timeout period
(140ms min) when selected manual reset input(s) are
held low for an extended setup timeout period. These
devices ignore manual reset transitions of less than the
extended setup timeout period.
o Single or Dual Manual Reset Inputs with Extended
Setup Period
o Optional Short Setup Time Manual Reset Input
(MAX6447/MAX6448 and MAX6451/MAX6452)
o Immune to Short Voltage Transients
o Low 6µA Supply Current
o Guaranteed Valid Reset Down to V
= 1.0V
CC
The MAX6443–MAX6448 are single fixed-voltage µP
supervisors. The MAX6443/MAX6444 have a single
extended manual reset input. The MAX6445/MAX6446
have two extended manual reset inputs. The MAX6447/
MAX6448 have one extended and one immediate manual
reset input.
o Active-Low RESET (Push-Pull or Open-Drain)
Outputs
o 140ms (min) Reset Timeout Period
o Small SOT143 and SOT23 Packages
Ordering Information
The MAX6449–MAX6452 have one fixed-threshold µP
supervisor and one adjustable-threshold µP supervisor.
The MAX6449/MAX6450 have two delayed manual
reset inputs. The MAX6451/MAX6452 have one delayed
and one immediate manual reset input.
PART
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
4 SOT143
MAX6443US_ _ _-T
MAX6444US_ _ _-T
4 SOT143
Note: The first “_ _ ” is a placeholder for the threshold voltage
level of the devices. A desired threshold level is set by the two-
number suffix found in Table 1. The third "_" is a placeholder
for the manual reset setup period of the devices. A desired
setup period is set by the letter suffix found in Table 2. All
devices are available in tape-and-reel only. There is a 2500-
piece minimum order increment for standard versions (Table
2). Sample stock is typically held on standard versions only.
Nonstandard versions require a minimum order increment of
10,000 pieces. Contact factory for availability.
The MAX6443–MAX6452 have an active-low RESET
with push-pull or open-drain output logic options. These
devices, offered in small SOT packages, are fully guar-
anteed over the extended temperature range (-40°C to
+85°C).
Applications
Set-Top Boxes
Consumer Electronics
DVD Players
Devices are available in both leaded and lead-free packaging.
Specify lead-free by replacing “-T” with “+T” when ordering.
Cable/DSL Modems
MP3 Players
Pin Configurations
TOP VIEW
Industrial Equipment
Automotive
4
3
1
2
GND
V
CC
Medical Devices
MAX6443
MAX6444
RESET
MR1
SOT143
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.