Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
Ultra-High-Precision, Ultra-Low-Noise,
Series Voltage Reference
MAX6226
General Description
Benefits and Features
● 8-pin Hermetically Sealed Ceramic Package
The MAX6226 is an ultra-low-noise, high-precision, low-
dropout voltage reference. This family of voltage references
feature curvature-correction circuitry and high-stability,
laser-trimmed, thin-film resistors that result in 3ppm/°C
(max) temperature coefficients and an excellent ±0.02%
(max) initial accuracy. The proprietary low-noise reference
Reduces System Board Space
● Ultra-Low 1.45μV
Noise (0.1Hz to 10Hz, 2.5V Output)
P-P
● Ultra-Low 3ppm/°C (Max) Temperature Coefficient
● ±0.02% (Max) Initial Accuracy
architecture produces a low flicker noise of 1.45μV
and
● Wide (V
+ 200mV) to 12.6V Supply Voltage Range
P-P
OUT
wideband noise as low as 75nV/√Hz (2.5V output) without
the increased supply current usually found in low-noise
references. Improve wideband noise to 45nV/√Hz and AC
power-supply rejection by adding a 0.1μF capacitor at the
noise reduction pin. The MAX6226 series mode reference
operates from a wide 2.7V to 12.6V supply voltage range
and load-regulation specifications are guaranteed to be
less than 0.25Ω and 0.05Ω for sink and source currents up
to 10mA, respectively. These devices are available over the
automotive temperature range of -40°C to +125°C.
● Low 200mV (Max) Dropout Voltage
● 380μA Quiescent Supply Current
● 10mA Sink/Source-Current Capability
● Stable with C
= 0.1μF to 10μF
LOAD
● Low 11ppm/1000hr Long-Term Drift
● 0.05Ω (Max) Load Regulation
● 25μV/V (Max) Line Regulation
● Force and Sense Outputs for Remote Sensing
The MAX6226 typically draws 380μAof supply current and
the output voltages are 2.5V, 3.3V, and 5.0V. The MAX6226
also feature dropout voltages as low as 200mV. Unlike conven-
tionalshunt-mode(two-terminal)referencesthatwastesup-
ply current and require an external resistor, the MAX6226
offers supply current that is virtually independent of
supply voltage and does not require an external resistor. The
MAX6226 is stable with 0.1μF to 10μF of load capacitance,
and is available in an 8-pin ceramic package.
Applications
● High-Resolution A/D and D/A Converters
● ATE Equipment
● High-Accuracy Reference Standard
● Precision Current Sources
● Digital Voltmeters
● High-Accuracy Industrial and Process Control
Ordering Information appears at end of data sheet.
Typical Operating Circuit
(V
+ 200mV) TO 12.6V INPUT
OUT
LONG-TERM STABILITY vs. TIME
(MAX6226ALA25+)
toc16
20
15
10
5
IN
REFERENCE
OUTPUT
OUTF
THREE TYPICAL UNITS
OUTS
MAX6226
*
NR
LOAD
*
0
GND
-5
0
200
400
600
800
1000
DURATION (HOURS)
*OPTIONAL.
19-100454; Rev 7; 5/22
©
2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2022 Analog Devices, Inc. All rights reserved.
|
|