MAX6126
Ultra-High-Precision, Ultra-Low-Noise,
Series Voltage Reference
General Description
Features
The MAX6126 is an ultra-low-noise, high-precision, low-
dropout voltage reference. This family of voltage refer-
ences feature curvature-correction circuitry and
high-stability, laser-trimmed, thin-film resistors that
result in 3ppm/°C (max) temperature coefficients and
an excellent ±±.±2ꢀ (max) initial accuracy. The propri-
etary low-noise reference architecture produces a low
o Ultra-Low 1.3µV
Noise (0.1Hz to 10Hz, 2.048V
P-P
Output)
o Ultra-Low 3ppm/°C (max) Temperature Coefficient
0.02ꢀ (max) ꢁnitial ꢂccuracy
o
o Wide (V
+ 200mV) to 12.6V Supply Voltage
OUT
flicker noise of 1.3µV
and wideband noise as low as
P-P
Range
6±nV/√Hz (2.±48V output) without the increased supply
current usually found in low-noise references. Improve
wideband noise to 35nV/√Hz and AC power-supply
rejection by adding a ±.1µF capacitor at the noise
reduction pin. The MAX6126 series mode reference
operates from a wide 2.7V to 12.6V supply voltage
range and load-regulation specifications are guaran-
teed to be less than ±.±25Ω for sink and source cur-
rents up to 1±mA. These devices are available over the
automotive temperature range of -4±°C to +125°C.
o Low 200mV (max) Dropout Voltage
o 380µꢂ Quiescent Supply Current
o 10mꢂ Sink/Source-Current Capability
o Stable with C
= 0.1µF to 10µF
LOꢂD
o Low 20ppm/1000hr Long-Term Stability
o 0.025Ω (max) Load Regulation
o 20µV/V (max) Line Regulation
The MAX6126 typically draws 38±µA of supply current
and is available in 2.±48V, 2.5±±V, 2.8±±V, 3.±±±V,
4.±96V, and 5.±±±V output voltages. These devices
also feature dropout voltages as low as 2±±mV. Unlike
conventional shunt-mode (two-terminal) references that
waste supply current and require an external resistor,
the MAX6126 offers supply current that is virtually inde-
pendent of supply voltage and does not require an
external resistor. The MAX6126 is stable with ±.1µF to
1±µF of load capacitance.
o Force and Sense Outputs for Remote Sensing
Pin Configuration
TOP VIEW
+
NR
IN
1
2
3
4
8
7
6
5
I.C.*
®
The MAX6126 is available in the tiny 8-pin µMAX , as
OUTF
OUTS
I.C.*
well as 8-pin SO packages.
MAX6126
Applications
GND
GNDS
High-Resolution A/D and D/A Converters
ATE Equipment
High-Accuracy Reference Standard
Precision Current Sources
Digital Voltmeters
SO/µMAX
*I.C. = INTERNALLY CONNECTED. DO NOT USE.
High-Accuracy Industrial and Process Control
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Ordering Information
OUTPUT
VOLTAGE
(V)
MAXIMUM TEMPCO
(-40°C to +85°C)
(ppm/°C)
PIN-
MAXIMUM INITIAL
ACCURACY (%)
PART
TEMP RANGE
PACKAGE
MAX6126AASA21+
MAX6126BASA21+
MAX6126A21+
-4±°C to +125°C
-4±°C to +125°C
-4±°C to +125°C
8 SO
2.±48
2.±48
2.±48
±.±2
±.±6
±.±6
3
5
3
8 SO
8 µMAX
Ordering ꢁnformation continued at end of data sheet.
+Denotes a lead(Pb)-free/RoHS-compliant package.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-2647; Rev 6; 8/12