5秒后页面跳转
MAX485ESA-T PDF预览

MAX485ESA-T

更新时间: 2024-01-28 18:23:36
品牌 Logo 应用领域
美信 - MAXIM 驱动光电二极管接口集成电路驱动器
页数 文件大小 规格书
19页 434K
描述
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOIC-8

MAX485ESA-T 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:SOIC
包装说明:SOP, SOP8,.25针数:8
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.05
其他特性:1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER差分输出:YES
驱动器位数:1高电平输入电流最大值:0.001 A
输入特性:DIFFERENTIAL SCHMITT TRIGGER接口集成电路类型:LINE TRANSCEIVER
接口标准:EIA-422; EIA-485JESD-30 代码:R-PDSO-G8
JESD-609代码:e0长度:4.9 mm
湿度敏感等级:1功能数量:1
端子数量:8最高工作温度:85 °C
最低工作温度:-40 °C最小输出摆幅:1.5 V
输出特性:3-STATE最大输出低电流:0.004 A
输出极性:COMPLEMENTARY封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装等效代码:SOP8,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):245电源:5 V
认证状态:Not Qualified最大接收延迟:200 ns
接收器位数:1座面最大高度:1.75 mm
子类别:Line Driver or Receivers最大压摆率:0.9 mA
最大供电电压:5.25 V最小供电电压:4.75 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn85Pb15)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED最大传输延迟:60 ns
宽度:3.9 mmBase Number Matches:1

MAX485ESA-T 数据手册

 浏览型号MAX485ESA-T的Datasheet PDF文件第2页浏览型号MAX485ESA-T的Datasheet PDF文件第3页浏览型号MAX485ESA-T的Datasheet PDF文件第4页浏览型号MAX485ESA-T的Datasheet PDF文件第5页浏览型号MAX485ESA-T的Datasheet PDF文件第6页浏览型号MAX485ESA-T的Datasheet PDF文件第7页 
19-0122; Rev 8; 10/03  
Low-Power, Slew-Rate-Limited  
RS-485/RS-422 Transceivers  
General Description  
__Next Generation Device Features  
For Fault-Tolerant Applications  
The MAX481, MAX483, MAX485, MAX487–MAX491, and  
MAX1487 are low-power transceivers for RS-485 and RS-  
422 communication. Each part contains one driver and one  
receiver. The MAX483, MAX487, MAX488, and MAX489  
feature reduced slew-rate drivers that minimize EMI and  
reduce reflections caused by improperly terminated cables,  
thus allowing error-free data transmission up to 250kbps.  
The driver slew rates of the MAX481, MAX485, MAX490,  
MAX491, and MAX1487 are not limited, allowing them to  
transmit up to 2.5Mbps.  
MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4  
Unit Load, +3.3V, RS-485 Transceiver  
MAX3440E–MAX3444E: ±15kV ESD-Protected,  
±60V Fault-Protected, 10Mbps, Fail-Safe,  
RS-485/J1708 Transceivers  
For Space-Constrained Applications  
MAX3460–MAX3464: +5V, Fail-Safe, 20Mbps,  
Profibus RS-485/RS-422 Transceivers  
MAX3362: +3.3V, High-Speed, RS-485/RS-422  
Transceiver in a SOT23 Package  
These transceivers draw between 120µA and 500µA of  
supply current when unloaded or fully loaded with disabled  
drivers. Additionally, the MAX481, MAX483, and MAX487  
have a low-current shutdown mode in which they consume  
only 0.1µA. All parts operate from a single 5V supply.  
MAX3280E–MAX3284E: ±15kV ESD-Protected,  
52Mbps, +3V to +5.5V, SOT23, RS-485/RS-422,  
True Fail-Safe Receivers  
MAX3293/MAX3294/MAX3295: 20Mbps, +3.3V,  
SOT23, RS-855/RS-422 Transmitters  
Drivers are short-circuit current limited and are protected  
against excessive power dissipation by thermal shutdown  
circuitry that places the driver outputs into a high-imped-  
ance state. The receiver input has a fail-safe feature that  
guarantees a logic-high output if the input is open circuit.  
For Multiple Transceiver Applications  
MAX3030E–MAX3033E: ±15kV ESD-Protected,  
+3.3V, Quad RS-422 Transmitters  
The MAX487 and MAX1487 feature quarter-unit-load  
receiver input impedance, allowing up to 128 MAX487/  
MAX1487 transceivers on the bus. Full-duplex communi-  
cations are obtained using the MAX488–MAX491, while  
the MAX481, MAX483, MAX485, MAX487, and MAX1487  
are designed for half-duplex applications.  
For Fail-Safe Applications  
MAX3080–MAX3089: Fail-Safe, High-Speed  
(10Mbps), Slew-Rate-Limited RS-485/RS-422  
Transceivers  
________________________Applications  
For Low-Voltage Applications  
MAX3483E/MAX3485E/MAX3486E/MAX3488E/  
MAX3490E/MAX3491E: +3.3V Powered, ±15kV  
ESD-Protected, 12Mbps, Slew-Rate-Limited,  
True RS-485/RS-422 Transceivers  
Low-Power RS-485 Transceivers  
Low-Power RS-422 Transceivers  
Level Translators  
Transceivers for EMI-Sensitive Applications  
Industrial-Control Local Area Networks  
Ordering Information appears at end of data sheet.  
______________________________________________________________Selection Table  
RECEIVER/  
DRIVER  
ENABLE  
QUIESCENT  
CURRENT  
(µA)  
NUMBER OF  
TRANSMITTERS  
ON BUS  
PART  
NUMBER  
HALF/FULL DATA RATE SLEW-RATE LOW-POWER  
PIN  
COUNT  
DUPLEX  
(Mbps)  
LIMITED  
SHUTDOWN  
MAX481  
MAX483  
MAX485  
MAX487  
MAX488  
MAX489  
MAX490  
MAX491  
MAX1487  
Half  
Half  
Half  
Half  
Full  
Full  
Full  
Full  
Half  
2.5  
0.25  
2.5  
No  
Yes  
No  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
No  
300  
120  
300  
120  
120  
120  
300  
300  
230  
32  
32  
8
8
32  
8
0.25  
0.25  
0.25  
2.5  
Yes  
Yes  
Yes  
No  
Yes  
No  
128  
32  
8
8
No  
Yes  
No  
32  
14  
8
No  
32  
2.5  
No  
No  
Yes  
Yes  
32  
14  
8
2.5  
No  
No  
128  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  

与MAX485ESA-T相关器件

型号 品牌 获取价格 描述 数据表
MAX485MJA MAXIM

获取价格

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
MAX4864 ETC

获取价格

MAX4864L MAXIM

获取价格

Overvoltage Protection Controllers with Reverse Polarity Protection
MAX4864L_10 MAXIM

获取价格

Overvoltage Protection Controllers with Reverse Polarity Protection
MAX4864LELT MAXIM

获取价格

Overvoltage Protection Controllers with Reverse Polarity Protection
MAX4864LELT+ MAXIM

获取价格

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO6, UDFN-6
MAX4864LELT+T MAXIM

获取价格

暂无描述
MAX4864LELT-T MAXIM

获取价格

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO6, 2 X 2 MM, UDFN-6
MAX4864LEUT MAXIM

获取价格

Overvoltage Protection Controllers with Reverse Polarity Protection
MAX4864LEUT-T MAXIM

获取价格

Overvoltage Protection Controllers with Reverse Polarity Protection