Datasheet > MAX4821ETP+T

MAX4821ETP+T

更新时间： 2024-12-01 20:51:27

品牌	Logo	应用领域
美信 - MAXIM		驱动信息通信管理接口集成电路驱动器
页数	文件大小	规格书
12页	454K
描述
Buffer/Inverter Based Peripheral Driver, 8 Driver, BICMOS, 4 X 4 MM, 0.80 MM PITCH, MO-220, QFN-20

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

MAX4821ETP+T 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	QFN
包装说明：	HVQCCN, LCC20,.16SQ,20	针数：	20
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	12 weeks
风险等级：	5.13	内置保护：	TRANSIENT
驱动器位数：	8	接口集成电路类型：	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 代码：	S-XQCC-N20	JESD-609代码：	e3
长度：	4 mm	湿度敏感等级：	1
功能数量：	1	端子数量：	20
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出电流流向：	SINK	最大输出电流：	0.15 A
封装主体材料：	UNSPECIFIED	封装代码：	HVQCCN
封装等效代码：	LCC20,.16SQ,20	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	峰值回流温度（摄氏度）：	260
电源：	3.3/5 V	认证状态：	Not Qualified
座面最大高度：	0.8 mm	子类别：	Peripheral Drivers
最大供电电压：	5.5 V	最小供电电压：	2.3 V
标称供电电压：	3.3 V	表面贴装：	YES
技术：	BICMOS	温度等级：	INDUSTRIAL
端子面层：	TIN	端子形式：	NO LEAD
端子节距：	0.5 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	断开时间：	1 µs
接通时间：	1 µs	宽度：	4 mm
Base Number Matches：	1

MAX4821ETP+T 数据手册

MAX4820/MAX4821

+3.3V/+5V, 8-Channel, Cascadable Relay Drivers

with Serial/Parallel Interface

General Description

Features

The MAX4820/MAX4821 8-channel relay drivers offer

built-in kickback protection and drive +3.3V/+5V non-

latching or dual-coil-latching relays. These devices are

especially useful when driving +3V relays. Each inde-

pendent open-drain output features a 2Ω on-resistance

and is guaranteed to sink 70mA (min) of load current.

Both devices consume less than 50µA (max) quiescent

current and have 1µA output off-leakage current.

♦ 8 Independent Output Channels

♦ Built-In Inductive Kickback Protection

♦ Drive +3V and +5V Relays

♦ Guaranteed 70mA (min) Coil Drive Current

♦ SET Function to Turn On All Outputs

Simultaneously

The MAX4820 features an SPI™-/QSPI™-/MICROWIRE™-

compatible serial interface. Input data is shifted into an 8-

bit shift register and latched to the outputs when CS

transitions from low to high. Each data bit in the shift reg-

ister corresponds to a specific output, allowing indepen-

dent control of all outputs.

♦ RESET Function to Turn Off All Outputs

Simultaneously

♦ SPI-/QSPI-/MICROWIRE-Compatible Serial

Interface (MAX4820)

♦ Serial Digital Output for Daisy Chaining

The MAX4821 features a 4-bit (A0, A1, A2, LVL) paral-

lel-input interface. The first three bits (A0, A1, A2) deter-

mine the output address, and the fourth bit (LVL)

determines whether the selected output is switched on

or off. Data is latched to the outputs when CS transi-

tions from low to high.

(MAX4820)

♦ Parallel Interface (MAX4821)

♦ Low 50µA (max) Quiescent Supply Current

♦ Space-Saving 20-Pin Thin QFN Package

Both devices feature separate set and reset functions

that allow the user to turn on or turn off all outputs simul-

taneously with a single control line. Built-in hysteresis

(Schmidt trigger) on all digital inputs allows this device

to be used with slow rising and falling signals, such as

those from optocouplers or RC power-up initialization

circuits. The MAX4820/MAX4821 are available in 20-pin

TSSOP and space-saving 20-pin Thin QFN packages.

Ordering Information

PART

TEMP RANGE

-40°C to +85°C

PIN-PACKAGE

20 Thin QFN-EP*

20 TSSOP-EP*

MAX4820ETP+

MAX4820EUP+

MAX4821ETP+

MAX4821EUP+

20 Thin QFN-EP*

20 TSSOP-EP*

+Denotes a lead(Pb)-free/RoHS-compliant package.

*EP = Exposed pad.

Applications

Central Office

Pin Configurations

ATE

TOP VIEW

DSL, ADSL Line Cards

Industrial Equipment

E1/T1 Redundancy

RESET

15 OUT3

14 OUT4

13 COM

12 OUT5

DIN

MAX4820

Pin Configurations continued at end of data sheet.

SCLK

DOUT

Typical Application Circuits and Functional Diagrams

appear at end of data sheet.

*EP

OUT6

THIN QFN

SPI and QSPI are trademarks of Motorola, Inc.

*CONNECT EP TO GND.

MICROWIRE is a trademark of National Semiconductor Corp.

For pricing, delivery, and ordering information, please contact Maxim Direct

19-2751; Rev 2; 1/10

at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.

12 3 4 5 6 7...12

中文翻译

下载PDF

MAX4821ETP+T 替代型号

型号	品牌	替代类型	描述	数据表
MAX4821ETP+	MAXIM	类似代替	+3.3V/+5V, 8-Channel, Cascadable Relay Drivers with Serial/Parallel Interface
MAX4821ETP	MAXIM	类似代替	+3.3V/+5V, 8-Channel, Cascadable Relay Drivers with Serial/Parallel Interface

与MAX4821ETP+T相关器件

型号	品牌	获取价格	描述	数据表
MAX4821EUP	MAXIM	获取价格	+3.3V/+5V, 8-Channel, Cascadable Relay Drivers with Serial/Parallel Interface
MAX4821EUP+	MAXIM	获取价格	+3.3V/+5V, 8-Channel, Cascadable Relay Drivers with Serial/Parallel Interface
MAX4821EUP-T	MAXIM	获取价格	暂无描述
MAX4822	MAXIM	获取价格	+3.3V/+5V, 8-Channel Relay Drivers with Fast Recovery Time and Power-Save Mode
MAX4822	ADI	获取价格	+3.3V/+5V、8通道继电器驱动器，具有快速恢复和省电模式
MAX4822ETP	MAXIM	获取价格	+3.3V/+5V, 8-Channel Relay Drivers with Fast Recovery Time and Power-Save Mode
MAX4822ETP+	MAXIM	获取价格	Buffer/Inverter Based Peripheral Driver, BICMOS, PQCC20, 4 X 4 MM, 0.80 MM HEIGHT, MO-220W
MAX4822ETP+T	MAXIM	获取价格	Buffer/Inverter Based Peripheral Driver, 8 Driver, BICMOS, PQCC20, 4 X 4 MM, 0.80 MM HEIGH
MAX4822ETP-T	MAXIM	获取价格	Buffer/Inverter Based Peripheral Driver, 8 Driver, BICMOS, PQCC20, 4 X 4 MM, 0.80 MM HEIGH
MAX4823	MAXIM	获取价格	+3.3V/+5V, 8-Channel Relay Drivers with Fast Recovery Time and Power-Save Mode

与MAX4821ETP+T相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

53
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

42
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

70
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

66

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX4821ETP+T

MAX4821ETP+T 技术参数

MAX4821ETP+T 数据手册

MAX4821ETP+T 替代型号

与MAX4821ETP+T相关器件

与MAX4821ETP+T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX4821ETP+T

MAX4821ETP+T 技术参数

MAX4821ETP+T 数据手册

MAX4821ETP+T 替代型号

与MAX4821ETP+T相关器件

与MAX4821ETP+T相关文章

您还可以找

您在本页遇到什么问题？