Datasheet > MAX40077

MAX40077

更新时间： 2024-12-01 02:52:59

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
10页	1523K
描述
2.7V to 5.5V Supply Voltage Range Across VDD and VSS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MAX40077 数据手册

Click here for production status of speciﬁc part numbers.

Evaluates: MAX40077, MAX40089

MAX40089 Evaluation Kit

General Description

Quick Start

The MAX40089 evaluation kit (EV kit) is a fully assembled

and tested circuit board that contains all the components

necessary to evaluate both MAX40077 and MAX40089

dual channel op amps.

Required Equipment

Before beginning, the following equipment is needed:

● MAX40089 EV kit

● 2.7V to 5.5V, 100mA DC power supply

● Precision voltage calibrator

● 2 digital multimeters

The MAX40089 EV kit printed circuit board (PCB) comes

installed with MAX40089AUT+ in an 8-µMAX package.

The device is a dual-channel, rail-to-rail output op amp

oﬀering 10MHz Gain Bandwidth product (MAX40077) and

42MHz Gain Bandwidth product (MAX40089). The EV kit

operates from a single 2.7V to 5.5V DC power supply or

from ±1.35V to ±2.75V split supply.

Procedure

The EV kit is fully assembled and tested. Follow the steps

below to verify board operation. Caution: Do not turn on

power supplies until all connections are completed

Features

and turn on V , V supplies before turning on voltage

sources on the input pins.

DD SS

● +2.7V to +5.5V Supply Voltage Range Across V

and V

1) Make sure JU1 and JU4 jumpers are installed in 1-2

and 1-4 position, respectively, before applying supply

voltage.

● 42MHz Gain Bandwidth Product (MAX40089)

● 10MHz Gain Bandwidth Product (MAX40077)

● Ultra-Low Distortion (0.0002% with 1kΩ load)

● Proven PCB Layout

2) Have JU5 installed for single-supply operation.

3) Connect positive terminal of the +5V supply to the

VDD test point and the GND terminal of supply to the

VSS test point.

● Fully Assembled and Tested

4) Connect the positive terminal of the precision voltage

source to the INA+ and INB+ test point and negative

terminal to GND test point.

Ordering Information appears at end of data sheet.

5) Connect 2 Digital Multimeters(DMM) to monitor the

voltage on the OUTA and OUTB test points.

6) Turn on the 5V power supply connected to VDD test

point and turn on the precision voltage source on

INA+, INB+ test points and set 0.1V. Observe the

output at the OUTA and OUTB test points on the

Multimeters. DMMs should approximately read 1V.

7) Also, now vary precision voltage source on inputs

INA+, INB+ between 0V to 0.45V and see if DMMs on

OUTA and OUTB test points is gained up by a factor

of 10V/V to the voltage applied on input.

Once above steps are confirmed, EV kit is tested for

functionality.

319-100180; Rev 1; 5/18

12 3 4 5 6 7...10

中文翻译

下载PDF

与MAX40077相关器件

型号	品牌	获取价格	描述	数据表
MAX40077AUA+T	MAXIM	获取价格	Operational Amplifier,
MAX40078	ADI	获取价格	单/双/四通道超低输入偏置电流、低噪声放大器
MAX40079	ADI	获取价格	单/双/四通道超低输入偏置电流、低噪声放大器
MAX4007EUT	MAXIM	获取价格	PLASTIC ENCAPSULATED DEVICES
MAX4007EUT-T	MAXIM	获取价格	High-Accuracy, 76V, High-Side Current Monitors in SOT23
MAX4008	MAXIM	获取价格	High-Accuracy, 76V, High-Side Current Monitors in SOT23
MAX40080	MAXIM	获取价格	Precision, Fast Sample-Rate, Digital Current-Sense Amplifier
MAX40080	ADI	获取价格	具有快速采样速率的精密数字电流检测放大器
MAX40080ANC+	MAXIM	获取价格	Precision, Fast Sample-Rate, Digital Current-Sense Amplifier
MAX40080ANC+T	MAXIM	获取价格	Precision, Fast Sample-Rate, Digital Current-Sense Amplifier

与MAX40077相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

53
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

42
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

70
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

66

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX40077

MAX40077 数据手册

与MAX40077相关器件

与MAX40077相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX40077

MAX40077 数据手册

与MAX40077相关器件

与MAX40077相关文章

您还可以找

您在本页遇到什么问题？