EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX40018
Dual nanoPower Op Amps
in Tiny WLP and TDFN Packages
General Description
Benefits and Features
● Ultra-Low Power Preserves Battery Life
The MAX40018 is a dual operational amplifier that
consumes only 400nA supply current (per channel). At
such low power consumption, the device is ideal for
battery-powered applications such as portable medical
equipment, portable instruments and wireless handsets.
• 400nA Typical Supply Current (Per Channel)
● Single 1.7V to 5.5V Supply Voltage Range
• The Device Can be Powered From the Same
1.8V/2.5V/3.3V/5V System Rails
The MAX40018 operates from a single 1.7V to 5.5V
supply, allowing the device to be powered by the same
1.8V, 2.5V, or 3.3V nominal supply that powers the
microcontroller. The MAX40018 features rail-to-rail
outputs and is unity-gain stable with a 9kHz gain bandwidth
product (GBP).
● Tiny Packages Save Board Space
• 1.63mm x 0.91mm x 0.5mm WLP-8 with 0.4mm
Bump Pitch
• 3mm x 3mm x 0.75mm TDFN-8 Package
● Precision Specifications for Buffer/Filter/Gain Stages
• Low 350μV Input Offset Voltage
• Rail-to-Rail Output Voltage
• 9kHz GBP
The ultra-low supply current, ultra-low input bias current,
low operating voltage, and rail-to-rail output capabilities
makethisdualoperationalamplifieridealforusewithsingle
lithium-ion (Li+), or two-cell NiCd or alkaline batteries.
• Low 0.1pA Input Bias Current
• Unity-Gain Stable
The MAX40018 is available in a tiny, 8-bump, 1.63mm x
0.91mm wafer-level package (WLP), with a bump pitch
of 0.4mm, as well as in an 8-pin 3mm x 3mm TDFN
package. The device is specified over the -40°C to
+125°C, automotive temperature range.
● -40°C to +125°C Temperature Range
Ordering Information appears at end of data sheet.
Simplified Block Diagram
Applications
● Wearable Devices
V
DD
● Handheld Devices
● Notebook and Tablet Computers
● Portable Medical Devices
● Portable Instrumentation
IN1+
IN1-
OUT1
OUT2
IN2+
IN2-
MAX40018
V
SS
19-100227; Rev 3; 11/19