Data Sheet
MAX25322
Dual, 6A, ASIL C Low-Voltage Buck Converter
General Description
Benefits and Features
The MAX25322 is an ASIL C-compliant, high-efficiency, dual
switching regulator that delivers up to 6A (peak) load current
per output from 0.5V to 1.5875V in 12.5mV steps and 1.6V to
3.8V in 50mV steps. The IC operates from 3V to 5.5V, making
it ideal for on-board point-of-load and post regulation applica-
tions. Total output error is less than ±1.0% over load, line, and
temperature.
● High Feature Set in Ultra-Small Footprint
• High-Efficiency DC-DC Converter
• Two Independent Outputs, up to 6A per Output
• 3.0V to 5.5V Operating Supply Voltage
• Factory-Preset Output Voltage
• 2.1MHz/3.2MHz Options
• Individual Enable Input
• Individual RESET Outputs
The MAX25322 features fixed-frequency PWM mode oper-
ation with a switching frequency of 2.1MHz or 3.2MHz. The
high-frequency operation allows for an all-ceramic capacitor
design with small external components.
• Spread-Spectrum Option
• Peak Current-Mode Architecture
• 3mm x 3.5mm FCQFN
● ASIL C Compliant
The low-resistance on-chip switches ensure high efficiency at
heavy loads while minimizing critical inductances, making the
layout a much simpler task with respect to discrete solutions.
Following a simple layout and footprint ensure first-pass suc-
cess in new designs.
• Factory-Programmable OV/UV with ±1% Accuracy
• Redundant Reference
• BIST Diagnostics
● Precision
• ±1% Output-Voltage Accuracy
• Excellent Load-Transient Performance
• PWM and SKIP Mode Operation
• MAXQ Power Architecture
®
The device features the MAXQ power architecture, which
provides precision transient performance and phase margin.
This allows obtaining the maximum power, performance, and
precision from the converter over a very wide range of con-
figurations.
● High Efficiency
• Up to 96% Efficiency 5V to 3.3V
• Up to 90% Efficiency 5V to 1V
The MAX25322 provides independent enable input for each
channel. The output voltage is preset at the factory to allow
customers to achieve ±1% output-voltage accuracy without
using expensive 0.1% resistors. The device offers factory-pro-
grammable soft-start and RESET times.
● -40°C to +125°C Operating Temperature Range
● AEC-Q100 Qualified
Applications
● Secondary Regulator for SoC/MCU Supply
The device includes overtemperature shutdown and over-
current limiting. It is designed to operate over the -40°C to
+125°C ambient temperature range.
Simplified Block Diagram
ꢀꢁꢂꢃ5ꢄꢃꢃ
%
Visit Web Support to complete the nondisclosure agreement (NDA) required to receive additional product information.
Rev. 6
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices
DOCUMENT FEEDBACK
for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change
without notice. No license is granted by implicationor otherwise under any patent or patent rights of Analog Devices. Trademarks andregistered
trademarks are the property of their respective owners.
TECHNICAL SUPPORT