EVALUATION KIT AVAILABLE
Click here to ask about production status of specific part numbers.
MAX22192
Octal Industrial Digital Input with
Diagnostics and Digital Isolation
General Description
Benefits and Features
The MAX22192 is an IEC 61131-2 compliant industrial
digital input device with integrated digital isolation. The
MAX22192 translates eight, 24V current-sinking, indus-
trial inputs to an isolated serialized SPI-compatible output
that interfaces with 1.71V to 5.5V logic voltage. A current-
setting resistor allows the MAX22192 to be configured for
Type 1, Type 2, or Type 3 inputs. For proximity switches,
the field-wiring is verified using the wire break feature.
When wire break is enabled, the LFAULT output is assert-
ed and a register flag set if the input current drops below
the wire break threshold for more than 20ms. Additional
diagnostics that assert LFAULT include: overtemperature
protection, low 24V field supply, 24V field supply missing,
and CRC communication error.
● High Integration Reduces BOM Count and Board Space
• Eight Input Channels with Serializer
• Integrated Isolation of 600V
for 60s (V
)
RMS
ISO
• Operates Directly from Field Supply (7V to 65V)
• Compatible with 1.8V, 3.3V or 5V Logic
• 6mm x 10mm GQFN Package
● Reduced Power and Heat Dissipation
• Accurate Input-Current Limiters
• Energyless Field-Side LED Drivers
● Fault Tolerant with Built-In Diagnostics
• Input Protection to ±40V with Low-Input Leakage
Current
• Wire-Break Detection
• Integrated Field-Supply Voltage Monitors
• Integrated Overtemperature Monitors
• 5-Bit CRC Code Generation for Error Detection
For robust operation in industrial environments, each input
includes a programmable glitch filter. The filter delay on
each channel can be independently programmed to one
of eight values between 50µs and 20ms, or filter bypass.
● Configurability Enables a Wide Range of Applications
• Configurable IEC 61131-2 Type 1, 2, 3 Inputs
• Configurable Input Current-Limiting from 0.5mA to
3.4mA
The MAX22192 has an isolated 4-pin SPI interface, and
in addition uses isolated LLATCH input for synchronizing
input data across multiple devices in parallel, and iso-
lated LFAULT output for instantly alerting the host of any
diagnostic issues. The digital signals with a name starting
with L are logic-side signals, and the digital signals with a
name starting with F are field-side signals.
• Selectable Input Glitch Filter
• Capable of Daisy-Chaining Other Field-Side De-
vices Sharing Isolated SPI
● Robust Design
The MAX22192 field-side accepts a single 7V to 65V sup-
• ±8kV Contact ESD and ±15kV Air-Gap ESD Using
Minimum 1kΩ Resistor
• ±1kV Surge Tolerant Using Minimum 1kΩ Resistor
• -40°C to +125°C Ambient Operating Temperature
ply to the V
pin. When powered by the field supply,
DD24F
the MAX22192 generates a 3.3V output on the V
pin
DD3F
from an integrated LDO regulator, which can provide up to
25mA of current for external loads in addition to powering
the MAX22192. Alternatively, the MAX22192 can be pow-
Applications
● Programmable Logic Controllers
ered from a 3.0V to 5.5V supply connected to the V
DD3F
pin. The logic-side of the MAX22192 is powered from a
● Industrial Automation
single 1.71V to 5.5V supply to the V
with 1.8V, 3.3V, or 5V logic levels.
pin to interface
● Process Automation
DDL
Safety Regulatory Approvals
● UL According to UL1577
● cUL According to CSA Bulletin 5A
The MAX22192 has an isolation rating of 600V
for 60
RMS
seconds and is available in a 70-pin GQFN package with
2.3mm clearance and creepage. The package material
has a minimum comparative tracking index (CTI) of 600V,
which gives it a group I rating in creepage tables.
Ordering Information and Typical Operating Circuits appear
at end of data sheet.
19-100406; Rev 3; 9/20