Click here to ask an associate for production status of specific part numbers.
High-Speed, Quad, Industrial Digital Input
MAX22193
with Parallel Output
Product Highlights
Simplified Application Diagram
•
•
•
•
High-Speed, Industrial Digital Inputs
• 300ns Maximum Propagation Delay
• 40ns Maximum Channel-to-Channel Skew
• Parallel Output for Simultaneous Signal Delivery
24V
3.3V
1.8V
1µF
1µF
0.1µF
0.1µF
V
DDA
V
DDB
V
V
DD3
V
DD
DD24
RDYEN
OP1
IN1
OUT1
IN1
IN2
IN3
1.5k ꢀ
OUT2
OUT3
OUT4
OP2
LED1
MICRO
CONTROLLER
OP3
MAX22166
MAX22193
High Integration Reduces BOM and Space
• Operates Directly from Field Supply (7V to 65V)
• Compatible with 3.3V or 5V Logic
OP4
IN4
IN5
IN4
OUT5
READY
1.5k ꢀ
18k ꢀ
REFDI
100k ꢀ
EXTVM
LED4
GND
GNDA
GNDB
GND
• 4mm x 4mm, 20-TQFN Package
Low Power and Low Heat Dissipation
• 1.2mA (max) Quiescent Current with 3.3V Supply
• Accurate Input Current-Limiters
Pin Configuration
• Energyless Field-Side LED Drivers
TOP VIEW
Fault Tolerant with Built-In Diagnostics
• Integrated Field-Side Supply Monitor
• Integrated Over-Temperature Monitor
• Current-Setting Resistor Monitor
15
14
13
12
11
REFDI 16
10
9
OP4
17
18
19
20
OP3
OP2
OP1
LED2
EXTVM
RDYEN
READY
•
•
Configurability Enables Wide Range of Applications
• Configurable IEC 61131-2 Types 1, 2, 3 Inputs
• Input Current Limiting from 1.18mA to 7.01mA
MAX22193
8
7
Robust Design for Industrial Environments
• ±2kV Surge Tolerant using 470Ω Resistor (min)
• ±8kV Contact ESD and ±15kV Air Gap ESD
Using 470Ω Resistor (min)
+
6
V
DD24
1
2
3
4
5
• -40°C to +125°C Ambient Operating Temperature
TQFN
4mm × 4mm
Key Applications
The MAX22193 provides a 3.3V integrated voltage
regulator. The internal LDO accepts the field supply
•
•
•
•
•
Programmable Logic Controllers (PLC)
Distributed Control System (DCS)
Motor Control
Industrial Automation
Process Automation
V
DD24
from 7V to 65V. The internal LDO output can
supply up to 25mA of current in addition to powering the
basic MAX22193 requirements. This LDO can be used
to power digital isolators and other field-side circuits.
Alternatively, the MAX22193 can be powered from an
The MAX22193 translates four 24V industrial digital
inputs to four CMOS-logic-compatible, parallel outputs.
Propagation delay from input-to-output is less than
300ns for all four channels. Current-limiter on each
digital input greatly reduces power dissipation compared
to traditional resistive input. The accuracy of these
current-limiters minimizes power dissipation while
ensures compliance with the IEC 61131-2 standard. A
current-setting resistor allows the MAX22193 to be
configured for Type 1, Type 2 or Type 3 digital inputs.
Additionally, the MAX22193 has energyless field-side
LED drivers to meet the indicator light requirement of
IEC 61131-2 with no additional power dissipation.
external 3.0V to 5.5V supply at V
.
DD3
The MAX22193 includes an open-drain READY output
that asserts high to indicate the MAX22193 is functional.
If the V
field-side supply voltage is too low, or a fault
DD24
in the current-setting resistor is detected, or the device
reaches an over-temperature condition, the READY
signal is set to high-impedance.
Ordering Information appears at end of data sheet.
19-101349; Rev 0; 06/22
© 2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2022 Analog Devices, Inc. All rights reserved.