EVALUATION KIT AVAILABLE
Click here to ask about the production status of specific part numbers.
MAX22199
Octal Industrial Digital Input
General Description
Benefits and Features
The MAX22199 is an IEC 61131-2 compliant industrial
digital input device. The MAX22199 translates eight 24V
current-sinking industrial inputs to a serialized SPI-
compatible output that interfaces with 3V to 5.5V logic.
It can operate as eight Type 1/Type 3 digital inputs or
four Type 2 digital inputs. The device provides diagnostic
functions, including thermal shutdown, 24V under volt-
age alarm, 24V missing voltage alarm, and SPI and CRC
communication error detection. All of the faults can be
configured to generate an interrupt using the FAULT pin.
● High Integration Reduces BOM Count and Board Space
• Eight Input Channels with Serializer
• Operates Directly from Field Supply (7V to 65V)
• Compatible with 3.3V or 5V Logic
• 5mm x 5mm TQFN Package
● Reduced Power and Heat Dissipation
• 0.6mA (typ) Supply Current
• ±11% Accurate Input-Current Limiters
• Energyless Field-Side LED Drivers
• Low Power Dissipation with Negative Input Voltage
● Fault Tolerant
For robust operation in industrial environments, each
input includes a programmable glitch filter. Noise filters on
each channel can be independently programmed to one
of eight values between 50µs and 20ms or filter bypass.
• Input Protection to ±40V
• Integrated Field-Supply Voltage Monitors
• 5-Bit CRC SPI Error Detection
● Configurability Enables Wide Range of Applications
• Configurable Input Current from 0.5mA to 3.4mA
• Selectable Input Debounce Filtering
• Current Sources Can Be Disabled
• Supports Daisy-Chain SPI and Direct SPI
● Robust Design
• ±8kV Contact ESD and ±15kV Air-Gap ESD Using
Minimum 1kΩ Resistor
• ±2kV Surge Tolerant Using Minimum 1kΩ Resistor
• -40°C to +125°C Ambient Operating Temperature
● Advanced Diagnostics Can Be Provided by MAX22190
• Pin-to-Pin Compatible
The MAX22199 has a 4-pin SPI interface and, in addition,
uses the LATCH input for synchronizing input data sam-
pling across multiple devices.
The MAX22199 field-side accepts a single 7V to 65V
supply to the V
pin. When powered by the field
DD24
supply, the MAX22199 generates a 3.3V output from an
integrated LDO regulator, which can provide up to 25mA
of current for external loads in addition to powering the
MAX22199. Alternatively, the MAX22199 can be powered
from a 3.0V to 5.5V logic side supply connected to the
V
pin. For flexibility, the SPI interface operates at 3.3V
DD
or 5V logic levels as controlled by the V pin.
L
• Register Compatible
Applications
● Programmable Logic Controllers
● Distributed Control System
● Motor Control
Ordering Information appears at end of data sheet.
● Building Automation
19-101135; Rev 0; 5/21