EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX17301–MAX17303/
MAX17311–MAX17313
1-Cell ModelGauge m5 EZ Fuel Gauge with
Protector and SHA-256 Authentication
General Description
Benefits and Features
The MAX17301–MAX17303/MAX17311–MAX17313 is a
● Battery Health + Programmable Safety/Protection
• Overvoltage (Temperature Dependent)
• Overcharge Current
24μA I stand-alone pack-side fuel gauge IC with protec-
Q
tor and optional SHA-256 authentication for 1-cell lithium-
ion/polymer batteries.
• Over/Undertemperature
• Ideal Diode Discharge During Charge Fault
• Charging Prescriptions (JEITA)
• Zero-Volt Charging Option
• Undervoltage + SmartEmpty
• Overdischarge/Short-Circuit
The IC monitors the voltage, current, temperature, and
state of the battery to provide against over/undervoltage,
overcurrent, short-circuit, over/undertemperature and
overcharge conditions protection using external high-side
N-FETs, and provides charging prescription to ensure that
the lithium-ion/polymer battery operates under safe condi-
tions prolonging the life of the battery.
● Nonvolatile Memory for Stand-Alone Operation
• History Logging, User Data (122 Bytes)
To prevent battery pack cloning, the IC integrates
SHA-256 authentication with a 160-bit secret key. Each IC
incorporates a unique 64-bit ID.
● Low Quiescent Current
• FETs Enabled: 24µA Active, 18µA Hibernate
• FETs Disabled: 7µA Ship, 0.5µA DeepShip,
0.1µA UV-Shutdown
The fuel gauge uses ModelGauge m5 algorithm that com-
bines the short-term accuracy and linearity of a coulomb
counter with the long-term stability of a voltage-based fuel
gauge to provide industry-leading fuel-gauge accuracy.
● Pushbutton Wakeup—Eliminates System
Consumption Until Button Press
● ModelGauge m5 EZ Algorithm
• Percent, Capacity,Time-to-Empty/Full, Age
• Cycle+™ Age Forecast
The IC automatically compensates for cell aging, temper-
ature, and discharge rate, and provides accurate state-of-
charge (SOC) in milliampere-hours (mAh) or percentage
(%) over a wide range of operating conditions.
● Dynamic Power—Estimates Power Capability
● Precision Measurement Without Calibration
• Current, Voltage, Power, Time, Cycles
• Die Temperature/Thermistor
Dynamic power functionality provides the instantaneous
maximum battery output power which can be delivered
to the system without violating the minimum system input
voltage.
Ordering Information appears at end of datasheet.
®
2
A Maxim 1-Wire or 2-wire I C interface provides access
to data and control registers. The IC is available in a
lead-free, 3mm x 3mm 14-pin TDFN and 1.7mm x 2.5mm
15-bump 0.5mm pitch WLP packages.
Simple Fuel Gauge with Protector Circuit Diagram
BATTERY PACK
SYSTEM
PK+
CHG
DIS
ZVC
Applications
CP
0.1µF
10Ω
BATT
● Smartphones, Tablets, and 2-in-1 Laptops
● Smartwatches and Wearables
● Medical Devices, Health and Fitness Monitors
● Digital Still, Video, and Action Cameras
● Handheld Computers and Terminals
● Handheld Radios
0.1µF
MAX1730x
MAX1731x
1kΩ
0.1µF
HOST
PCKP
OPTIONAL PFAIL
(MAX173x1 ONLY)
OPTIONAL
NTC THERMISTOR
ALRT/PIO
SDA/DQ
TH
µP
REG
SCL/OD
(TDFN)
EP
(WLP)
GND
CSN
CSP
0.47µF
SENSE
RESISTOR
Secondary
Protector
● Home and Building Automation, Sensors
● Smart Batteries
PK-
ModelGauge and Cycle+ are trademarks of Maxim Integrated Products, Inc.
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
19-100463; Rev 3; 5/19