EVALUATION KIT AVAILABLE
MAX16132–MAX16135
Low-Voltage, Precision, Single/Dual/Triple/
Quad-Voltage μP Supervisors
General Description
Benefits and Features
● High Precision
The MAX16132–MAX16135 are low-voltage, ±1% accurate,
single, dual, triple, and quad-voltage μP supervisors that
monitor up to 4 system-supply voltages for undervoltage
and overvoltage faults. The MAX16132–MAX16134 feature
independent reset outputs, while the MAX16135 features
dual reset outputs. For the MAX16132–MAX16134, a
reset output asserts when the voltage at its corresponding
input falls outside a factory-trimmed undervoltage and
overvoltage window threshold. The reset is maintained
for a minimum timeout period after voltage at the input
falls within the factory-set window threshold. For the
MAX16135, a reset output asserts when either, or both, of
the corresponding inputs fall outside the factory-trimmed
undervoltage and overvoltage window thresholds. See
Selector Guide for available options. These integrated
supervisory circuits significantly improve system reliability
and reduce size compared to separate ICs or discrete
components.
• ±1% Threshold Accuracy Over Temperature
● Programmable OV Threshold: 104% to 111%
● Programmable UV Threshold: 89% to 96%
● Programmable Input Voltage from 0.5V to 5.0V
● Low 15µA Supply Current
● Quad-Input Monitor
● 23 Programmable Reset Timeout Periods
● Immune to Short Monitored Supply Transients
● Guaranteed Correct Logic State Down to V
● Open-Drain Outputs
= 1V
DD
● Small SOT-23 Package
● -40°C to +125°C Automotive Operating Temperature
Range
The MAX16132–MAX16135 are fixed-threshold devices.
The nominal input voltage for any input is factory
programmable from 0.5 to 5.0V, providing a wide range
of threshold selections. The window threshold levels are
factory programmable from ±4% to ±11%, with ±1%
resolution and 0.25% or 0.50% hysteresis. The ±1%
threshold accuracy over temperature and window threshold
monitoring make these devices ideal for automotive
ADAS applications.
Ordering Information appears at end of data sheet.
The reset outputs are active-low, open-drain, and are
guaranteed to be in the correct reset output logic state
when V
remains greater than 1.0V. All devices are
DD
offered with 23 reset timeout periods ranging from 20µs
(min) to 1200ms (min). All reset outputs share the same
factory-set reset timeout period.
The MAX16132–MAX16135 are available in a small 8-pin
SOT23 package and specified over the automotive
temperature range of -40°C to +125°C.
Applications
● ADAS
● Multivoltage ASICs
● Storage Equipment
● Servers
19-8708; Rev 2; 2/17