EVALUATION KIT AVAILABLE
Click here to ask an associate for production status of specific part numbers.
Compact Industrial Octal 1A/Quad 2A
High-Side Switch with Diagnostics
MAX14916, MAX14916A
General Description
Benefits and Features
The MAX14916 and MAX14916A are equipped with
eight high-side switches with an on-resistance of only
120mΩ (typ), or 250mΩ (max) at 125°C ambient tem-
perature. Each channel is specified to handle up to 1.1A
(MAX14916) or 1.5A (MAX14916A) of continuous current.
Similarly, two adjacent channels can be driven together to
form four 2.4A (MAX14916) or 3A (MAX14916A) switches.
● MAX14916 Current Limit, 1.1A (min) or 1.38A (typ)
● MAX14916A Current Limit, 1.5A (min) or 2A (typ)
● Robustness and Smart Diagnostics
• 65V Absolute Maximum Supply Range
• Internal Clamps for Fast Inductive Load
Demagnetization
• CRC Error Checking on the SPI Interface
• Watchdog Timer
• Open-Wire Detection, with Switches Both in ON and
OFF States
The SPI interface has a built-in chip addressing decoder,
allowing communication with up to four MAX14916 or
MAX14916A devices utilizing a common SPI chip select
(CS).
• Undervoltage Detection with UVLO
• Loss of V
or GND Protection
DD
The SPI interface provides flexibility for global and
per-channel configuration and diagnostic, including
undervoltage detection, open-wire detection, overload
and current limiting reporting, thermal conditions report-
ing, and more.
• Thermal Shutdown Protection
• Integrated ±1kV/42Ω IEC61000-4-5 Surge
Protection
• -40°C to +125°C Operating Ambient Temperature
● Reduces Power and Heat Dissipation
Each channel is equipped with open-wire detection that
can detect an open-load in both switch on and off states.
LED drivers provide indication of per-channel fault, sta-
tus, and supply undervoltage conditions. Internal active
clamps allow for fast turn-off of inductive loads.
• 250mΩ (max) On-Resistance at T = 125°C
• 2mA (typ) Supply Current
• Accurate Output Current Limiting
A
● Flexibility
• Addressable SPI Interface Reduces Isolation Cost
• SYNCH Input for Simultaneous Update of Switches
• LED Driver Matrix for 16 LEDs, Powered by 24V,
5V, or 3.3V
Integrated line-to-ground and line-to-line surge protection
only requires a single TVS on V . Integrated surge pro-
DD
tection works for quad and octal configuration.
• Flexible Logic Voltage Interface from 2.5V to 5.5V
The MAX14916 and MAX14916A are available in a com-
pact 48-pin 6mm x 6mm QFN package.
● Compact 6mm x 6mm QFN Package
Applications
● Industrial Digital Outputs
● PLC Systems
Ordering Information appears at end of data sheet.
19-100575; Rev 1; 6/23
©
2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A.
|
Tel: 781.329.4700
|
© 2023 Analog Devices, Inc. All rights reserved.