EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX14819/MAX14819A
Dual IO-Link Master Transceiver with Integrated
Framers and L+ Supply Controllers
General Description
Benefits and Features
● Low-Power Architecture
The MAX14819/MAX14819A low-power, dual-channel,
®
IO-Link master transceiver with sensor/actuator power-
•ꢀ 1Ωꢀ(typ)ꢀDriverꢀOn-Resistanceꢀ
supply controllers is fully compliant with the latest IO-Link
and binary input standards and test specifications, IEC
61131-2, IEC 61131-9 SDCI, and IO-Link 1.1.3. This
master transceiver also includes two auxiliary digital input
(DI_) channels.
• 1.9mA (typ) Total Supply Current for 2 Channels
• Current Limiters with 15mV Sense Voltage
● Integrated IO-Link Framer Eliminates Need for
External UARTs
• Integrated Cycle Timer Relieves Microcontroller
from Timing-Critical Tasks
The MAX14819/MAX14819A is configurable to operate
either with external UARTs or using the integrated fram-
ers on the IC.
● High Configurability and Integration Reduce SKUs
• Two Auxiliary Type 1/Type 3 Digital Inputs
• Supports NPN Sensors
To ease selection of microcontroller, the master transceiver
features frame handlers with UARTs and FIFOs. These
are designed to simplify time critical control of all IO-Link
M-sequence frame types. The MAX14819/MAX14819A
also features autonomous cycle timers, reducing the need
for accurate controller timing. Integrated establish-commu-
nication sequencers also simplify wake-up management.
• Dual 24V Sensor Supply Controllers Include:
• Large Capacitive Load Charge Capability
• 2A and Higher Load Currents
● Integrated Protection Enables Robust Systems
• Reverse Polarity Protection on All Interface Pins
• Overvoltage Tolerance on All Interface Pins
• C/Q and DI Fully Compliant with IEC 61131-2
• C/Q Compliant with IO-Link 1.1.3.
The device message response delay on the MAX14819A
can be disabled when using the frame handler and
the MAX14819A features higher L+ thresholds than
the MAX14819. The MAX14819A receivers also feature
increased high-frequency signal isolation compared to
the MAX14819.
• Reverse Current Blocking on L+ and C/Q
• 65V Absolute Max Ratings for TVS Flexibility
• Glitch Filters for Improved Burst Resilience
• -40°C to +125°C Operating Temperature Range
The MAX14819/MAX14819A integrates two low-power
sensor supply controllers with advanced current limiting,
reverse current-blocking, and reverse polarity protection
capability to enable low-power robust solutions.
Ordering Information appears at end of data sheet.
IO-Link is a registered trademark of Profibus User Organization
(PNO).
The MAX14819/MAX14819A is available in a 48-pin
(7mm x 7mm) TQFN package and is specified over the
extended -40°C to +125°C temperature range.
Applications
● IO-Link Master Systems
● IO-Link Gateways
19-8744; Rev 3; 3/20