19-5955; Rev 0; 6/11
4-Channel, Automotive Class D Audio Amplifier
General Description
Features
SꢀHigh_Output_Power_(10%_THD+N)
ꢀ2_x_160W_into_2I_at_24V
The MAX13301 combines four high-efficiency Class D
amplifiers with integrated diagnostic hardware for reli-
able automotive audio systems, and delivers up to 80W
at 10% THD+N per channel into 4I when operating from
a 24V supply.
ꢀ4_x_80W_into_4I_at_24V
Sꢀ2_Channels_Can_Be_Paralleled
SꢀFeedback_After_the_Filter
ꢀImproves_THD+N
The internal diagnostics evaluate each channel’s output
impedance to check for shorts across the outputs, to the
battery, or to ground. The I2C interface allows the sys-
tem to query critical device parameters such as device
temperature and output clipping. The device is program-
mable to four different I2C addresses.
ꢀLow_Output_Impedance
ꢀHigh-Frequency_Response
ꢀImproved_Damping_of_Complex_Loads
ꢀEnables_Low-Cost_Inductors
Sꢀ102dB_SNR
The audio amplifiers feature single-ended analog inputs
with a common negative input. The MAX13301 has a
fixed gain of 26dB.
SꢀLow_0.04%_THD+N
Sꢀ70dB_PSRR
SꢀOn-Board_Diagnostics
ꢀShort-to-Battery/GND
ꢀOpen/Shorted_Load
ꢀTweeter_Detect
The Class D amplifier has 10 programmable switching
frequencies between 300kHz and 750kHz.
The BTL outputs are protected against short circuits and
thermal overload. The outputs can be configured as a
2-, 3-, or 4-channel amplifier. The device provides 50V
load-dump protection, and is offered in the thermally
enhanced, 48-pin TSSOP-EPR package operating over
the -40NC to +125NC temperature range.
SꢀProtection_and_Monitoring_Functions:
ꢀShort-Circuit_Protection
ꢀ50V_Load-Dump_Protection
ꢀProgrammable_Clip_Detection
ꢀDC_Offset_Detection
ꢀOpen_Battery/GND_Tolerant
ꢀThermal-Overload_Protection
ꢀThermal_Warning_Indication
Applications
Car Stereo
SꢀFour-Address_I2C_Control_Interface
Rear-Seat Entertainment Units
Discrete Amplifier Modules
Active Loudspeaker Systems
Radio Head Units
SꢀLow-Power_Shutdown_Mode
SꢀUp_to_90.5%_Efficiency
Sꢀ-40°C_to_+125°C_Ambient_Operating_Temperature
Sꢀ 48-Pin_TSSOP-EPR_(Top_Side_Exposed_Pad)_Package
SꢀAEC-Q100_Qualified
Mobile Surround Systems
Ordering Information
SUPPLY_VOLTAGE_
PART
PIN-PACKAGE
RANGE_(V)
Typical Operating Circuit appears at end of data sheet.
MAX13301AUM/V+ 48 TSSOP-EPR*
6 to 25.5
Note: The device operates over the -40°C to +125°C operating
temperature range.
/V denotes an automotive qualified part.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EPR = Top side exposed pad.
_ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ _Maxim Integrated Products_ _ 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.