MAQ4123/MAQ4124/MAQ4125
Automotive AEC-Q100 Qualified Dual
3A Peak Low-Side MOSFET Driver
Bipolar/CMOS/DMOS Process
General Description
Features
The MAQ4123/MAQ4124/MAQ4125 are a family of dual
3A buffer/MOSFET drivers intended for driving power
MOSFETs, IGBTs and other heavy loads (capacitive,
resistive or inductive) which require low-impedance, high
peak currents and fast switching times. They are available
• Automotive AEC-Q100 Qualified
• High ±3A peak output current
• Wide 4.5V to 20V supply voltage range
• Low 2.3Ω output resistance
in
inverting,
non-inverting
and
complementary
• Matched rise and fall times
configurations.
• Fast 10ns rise/fall times with 1800pF capacitive load
• Low propagation delay time of 50ns (typical)
• TTL/CMOS logic inputs independent of supply voltage
• Latch-up protected to 200mA reverse current
• Logic input withstands swing to −5V
• Low equivalent 6pF input capacitance
• Output voltage swings within 25mV of ground or VS
• Low supply current
The MAQ4123/MAQ4124/MAQ4125 operate from a 4.5V
to 20V supply, feature an output resistance of 2.3Ω, sink or
source 3A of peak current, and switch an 1800pF
capacitive load in 10ns with typical propagation delay
times of 50ns.
The MAQ4123/MAQ4124/MAQ4125 feature TTL or CMOS
compatible inputs with 400mV of hysteresis to provide
noise immunity. The inputs can withstand negative voltage
swings of 5V and are latch-up protected to withstand
200mA of reverse current.
− 2.0mA with logic-1 input (maximum over
temperature)
The MAQ4123/MAQ4124/MAQ4125 are rated for the
−40°C to +125°C operating temperature range, have been
AEC-Q100 qualified for automotive applications, and are
available in the ePad SOIC-8 package for improved power
dissipation and thermal performance required by
automotive applications.
− 300μA with logic-0 input (maximum over
temperature)
• ‘426/7/8-, ‘1426/7/8-, ‘4426/7/8 industry standard pin
out
• Inverting, non-inverting, and differential configurations
• −40°C to +125°C temperature range
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
• Exposed backside pad (ePad) packaging for improved
power dissipation
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-072511-A
July 2011