MAAM-008198-00A162
Cascadable Amplifier
10 to 1200 MHz
Rev. V4
Product Image
Features
•
•
•
•
LOW NOISE: 3.5 dB (TYP.)
HIGH EFFICIENCY: 15 mA (TYP.) @ +5 Volts
GOOD DYNAMIC RANGE: 102.5 dB (TYP.) in 1 MHz BW
LOW VSWR: <1.5:1 (TYP.)
Description
The A16-2 RF amplifier is a discrete thin film hybrid design, which
incorporates the use of thin film manufacturing processes for
accurate performance and high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency range.
An active DC biasing network is used for temperature-stable
performance, in addition to an RF Choke, used for power supply
decoupling.
Both TO-8 and Surface Mount packages are hermetically sealed,
and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
Package
TO-8
MAAM-008198-00A162
MAAM-008198-SMA162
MAAM-008198-0CA162
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Absolute
Typical
Guaranteed
0º to 50ºC -54º to +85ºC*
Maximum
-62ºC to +125ºC
+125ºC
Parameter
Units
25ºC
5-1300
13.0
Storage Temperature
Case Temperature
DC Voltage
Frequency
MHz
dB
10-1200
12.0
10-1200
11.5
+8 V
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Continuous Input Power
+13 dBm
dB
±0.2
±0.5
±0.7
Short Term Input power
(1 minute max.)
50 mW
0.5 W
dB
16
Peak Power (3 µsec max.)
Noise Figure (max)
dB
3.5
6.0
4.0
5.0
4.5
4.5
“S” Series Burn-In
Temperature (case)
+125ºC
Power Output
@ 1 dB comp. (min)
dBm
IP3
dBm
dBm
dBm
+18
+28
+34
Thermal Data: VCC = +5 VDC
IP2
Parameter
Rating
45ºC/W
0.051 W
Second Order Harmonic IP
VSWR Input / Output (max)
Thermal Resistance θjc
Transistor Power Dissipation Pd
1.5:1 / 1.5:1 2.2:1 / 2.2:1
15 17
2.3:1 / 2.3:1
18
Junction Temperature Rise
Above Case Tjc
+2ºC
DC Current @ 15 Volts (max)
mA
* Over temperature performance limits for part number CA16-2, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.