MODEL: M6NVF
-40 – +40 mV DC
-85 – +85 mV DC
-164 – +164 mV DC
-200 – +200 mV DC
-15 – +15 V DC
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
SIGNAL TRANSMITTER
(high-accuracy, ultra-high speed response 30 μsec.)
Functions & Features
-25 – +25 V DC
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm
deep panel
-55 – +55 V DC
-60 – +60 V DC
• Galvanically isolates process instrumentation signals
• 30-microsecond response
OUTPUT
Voltage
• Frequency characteristics 12 kHz (-3 dB)
• High-density mounting
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)
• Power indicator LED
POWER INPUT
DC Power
Typical Applications
• Isolation for a vibration analyzing system
• Isolation for Discharge/Charge tester
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
7.5 (.30)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
102
(4.02)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
102
(4.02)
/C02: Polyurethane coating
mm (inch)
GENERAL SPECIFICATIONS
Connection
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
MODEL: M6NVF–[1]4W–R[2]
ORDERING INFORMATION
• Code number: M6NVF-[1]4W-R[2]
Specify a code from below for each [1] and [2].
(e.g. M6NVF-04W-R/Q)
Applicable wire size: 0.2 – 2.5 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
• Special input range (For code 0: e.g. -164 – +164 mV DC)
• Specify the specification for option code /Q
(e.g. /C01)
Overrange input: -5 to +105 %
Zero adjustment: -1 to +1 % (front)
Span adjustment: 99 to 101 % (front)
[1] INPUT
Voltage
Power LED: Green light turns on when the power is supplied.
■Recommended solderless terminal (unit: mm (inch))
2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
8W: -20 – +20 V DC (Input resistance 1 MΩ min.)
0: Specify voltage
5.5 max.
(.22)
4 min.
(.16)
3.2 (.13) dia.
(Select input range as indicated below. Input resistance 1 MΩ min.)
-20 – +20 mV DC
-24 – +24 mV DC
M6NVF SPECIFICATIONS
ES-7924 Rev.4 Page 1/3
http://www.m-system.co.jp/