MODEL: M6NDY
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
[2] OPTIONS (multiple selections)
Standards & Approvals
CURRENT LOOP SUPPLY
Functions & Features
blank: CE marking
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm
deep panel
/UL: UL approval, CE marking
Other Options
blank: none
• Powers a two-wire transmitter and galvanically isolates its
output signal
/Q: Option other than the above (specify the specification)
• High-density mounting
• Power indicator LED
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
7.5 (.30)
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
102
(4.02)
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
102
(4.02)
mm (inch)
Applicable wire size: 0.2 – 2.5 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
MODEL: M6NDY–[1]–R[2]
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Power LED: Green light turns on when the power is supplied.
■Recommended solderless terminal (unit: mm (inch))
ORDERING INFORMATION
• Code number: M6NDY-[1]-R[2]
Specify a code from below for each [1] and [2].
(e.g. M6NDY-A-R/UL/Q)
5.5 max.
(.22)
4 min.
(.16)
3.2 (.13) dia.
• Specify the specification for option code /Q
(e.g. /C01)
INPUT
Current
SUPPLY OUTPUT
(across the terminals 3 – 4)
4 – 20 mA DC (Input resistance 249.5 Ω)
Output voltage: 24 – 30 V DC with no load
18 V DC min. at 20 mA
[1] OUTPUT
Current
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
Voltage
Current limited: 45 mA max.
Protected time duration: No limit
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
POWER INPUT
DC Power
R: 24 V DC
M6NDY SPECIFICATIONS
ES-7903 Rev.8 Page 1/4
http://www.m-system.co.jp/