MODEL: M60SWVS
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series
OUTPUT 1 – Field-selectable
Current
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
SIGNAL TRANSMITTER
(field-configurable, two isolated outputs)
Functions & Features
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
• Converts DC input from a sensor into a standard process
signal
• Output range and response time selectable with DIP SW
• Power connector for interconnecting modules and
collectively supplying power
OUTPUT 2 – Field-selectable
Current
• Spring clamp terminal connection for easy wiring
• 6-mm wide ultra-slim design
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
• Power indicator LED
8 (.31)
POWER INPUT
DC Power
R: 24 V DC
108 (4.25)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
blank: none
102 (4.02)
/Q: Options other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: M60SWVS-R[1]
/C02: Polyurethane coating
ORDERING INFORMATION
• Code number: M60SWVS-R[1]
Specify a code from below for [1].
(e.g. M60SWVS-R/Q)
GENERAL SPECIFICATIONS
Connection
• Specify the specification for option code /Q
(e.g. /C01)
Input and output: Spring clamp terminal
Power input: Via the power connector or the spring clamp
terminal
• Default at shipment
Input range: 4 – 20 mA DC
Applicable wire size: 0.2 to 1.5 mm , stripped length 8 mm
2
Output 1 range: 4 – 20 mA DC
Output 2 range: 4 – 20 mA DC
Response time: Standard response
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Adjustable individually for each output 1 and output 2.
Power LED: Green LED turns on when the power is supplied.
INPUT – Field-selectable
Current
4 – 20 mA DC (Input resistance 50 Ω)
0 – 20 mA DC (Input resistance 50 Ω)
Voltage
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
0 – 10 V DC (Input resistance 200 kΩ min.)
2 – 10 V DC (Input resistance 200 kΩ min.)
0 – 5 V DC (Input resistance 100 kΩ min.)
1 – 5 V DC (Input resistance 100 kΩ min.)
INSTALLATION
Power consumption: 0.7 W max.
Power input: 3 A (Total current consumed by the
M60SWVS SPECIFICATIONS
ES-8023 Rev.1 Page 1/4
http://www.m-system.co.jp/