MODEL: M5PT
Super-mini Terminal Block Signal Conditioners M5-UNIT
[3] POWER INPUT
AC Power
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
PT TRANSMITTER
Functions & Features
47 – 66 Hz)
DC Power
• Converts an alternating voltage from a potential (voltage)
transformer into a standard process signal
• True RMS sensing
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• High-density mounting
• Power LED
[4] OPTIONS
blank: none
25 (.98)
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
97
(3.82)
/C02: Polyurethane coating
41 (1.61)
mm (inch)
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
MODEL: M5PT-[1][2]-[3][4]
GENERAL SPECIFICATIONS
Construction: Terminal block
ORDERING INFORMATION
• Code number: M5PT-[1][2]-[3][4]
Specify a code from below for each [1] through [4].
(e.g. M5PT-14W-R/Q)
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Input waveform
RMS sensing: Up to 15 % of 3rd harmonic content
Overrange output: Approx. 0 to 110 % at 1 – 5 V
Zero adjustment: -2 to +2 % (front)
[1] INPUT
Voltage
Span adjustment: 98 to 102 % (front)
Power LED: Green LED turns on when the power is supplied.
1: 0 – 110 V AC
2: 0 – 220 V AC
5: 0 – 150 V AC
INPUT SPECIFICATIONS
Frequency: 50 or 60 Hz
[2] OUTPUT
Current
Input burden: 0.5 VA max.
Overload capacity: 200 % of rating for 1 min., 120 %
continuous
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Operational range: 5 – 120 % of rating
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
4W: -10 – +10 V DC (Load resistance 8000 Ω min.)
5W: -5 – +5 V DC (Load resistance 4000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 11 V max.
■ DC Voltage: 0 – 10 V DC
Minimum span: 1 V
Offset: Max. 1.5 times span
Load resistance: Output drive 10 mA max.; at ≥ 1 V
M5PT SPECIFICATIONS
ES-2488 Rev.7 Page 1/3
http://www.m-system.co.jp/