Technical Information
No. FO 5042
Linear Excimer Lamp
Edition: 03/03 - subject to change
Supersedes:
Status: initial
LINEX LX24T3/956/A4
Product description
The OSRAM LINEX LX24T3/956/A4 is a dielectric barrier discharge lamp system. It consists of an aperture lamp
and an inverter. It is especially used for the exposure process in digital copiers and scanners. The lamp provides
an illuminance of 48,000 lux in white (triphosphor). The Xenon gas discharge enables instant light within a few
milliseconds. The light output shows no temperature dependence as well as a steady light emission. Since OSRAM
patented internal electrodes are used no high voltage isolation is needed.
15
15
235
2
8
2
11.5
75°
3.1
5
Lamp technical data 1
Order reference
LX24T3/956/A4
24
KHz > 80
KV < 3
48,000
0.324 / 0.336
Hrs. 1000
24
mm 230
Lamp overall length Lo
Inner emission length Li
80% of center illuminance
Outer diameter base D
Outer diameter glass tube
Aperture α
mm
mm
mm
mm
mm
deg.
267,5
180
System power consumption
Rated lamp voltage
Illuminance 2
W
Lx
10.0
75
Color coordinates 2: x / y
Maintenance >80%
Lamp weight
Cable length
1 ambient room temperature of 25°C
Note: lamp base design on customer request possible
2 measured at a distance of 8mm from the aperture by Minolta T-1M
DC-HV inverter technical data 1
Order reference
QT LINEX 1x24/24
Inverter size
Inverter weight
Mm
G
135 (L) x 40 (W) x 28 (H)
110
Nominal/Min./Max. input voltage
Nominal/Maximum input current
Vdc
A
A
24 / 21.6 / 26.4
1.0 / 1.1
2
Typical input inrush current 3
3 switch on by lamp enable
The inverter provides an electrical pulse wave to the lamp.
The lamp system is covered by one or more of the following patents:
WO 94/23442, WO 98/49712. Other patents not listed may apply or pending.
Photo Optics Berlin