5秒后页面跳转
LTR10EVHFL1R58 PDF预览

LTR10EVHFL1R58

更新时间: 2024-11-30 10:41:11
品牌 Logo 应用领域
罗姆 - ROHM /
页数 文件大小 规格书
4页 151K
描述
Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.58ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0508, CHIP

LTR10EVHFL1R58 数据手册

 浏览型号LTR10EVHFL1R58的Datasheet PDF文件第2页浏览型号LTR10EVHFL1R58的Datasheet PDF文件第3页浏览型号LTR10EVHFL1R58的Datasheet PDF文件第4页 
High Power Low Ohmic Chip Resistors<Wide Terminal type>  
LTR10 (2012 size : 1 / 2W)  
zFeatures  
1) Improved welding strength  
The structure of longer electrodes provides the wider welding area than the chip resistors with normal electrodes, and this  
enhanced the solder welding strength.  
2) Increased surge-resistance  
This is achieved by Rohm’s original trimming technology plus resistive element patterning.  
3) High-power tolerance  
Two times of the rated power is guaranteed than the normal-electrode resistors.  
4) ROHM resistors are ISO-9001 & ISO/TS16949 certified.  
Design and specifications are subject to change without notice. Carefully check the specification sheet before using or  
ordering it.  
zApplications  
Automotive, industrial and power supply.  
zRatings  
Item  
Conditions  
Specifications  
0.5W (1 /2W)  
Rated power  
Power must be derated according to the power derating curve in  
Figure 1 when ambient temperature exceeds 70°C.  
at 70°C  
100  
80  
60  
40  
20  
0
55  
0
70  
100  
155  
AMBIENT TEMPERATURE (°C)  
Fig.1  
Rated voltage  
Rated current  
The voltage rating is calculated by the following equation.  
E = P × R  
I = P / R  
E : Rated voltage (V)  
I : Rated current (A)  
P : Rated power (W)  
R : Nominal resistance ()  
Nominal resistance  
See Table 1.  
Operating temperature  
55°C to + 155°  
C
Table 1  
Resistance range  
Resistance temperature coefficient  
Resistance  
tolerance  
Special part number  
()  
(ppm/°C)  
F
J
( 1%)  
( 5%)  
S
L
0.047 to 9.1  
150  
zBefore using components in circuits where they will be exposed to transients such as pulse loads (short–duration, high– level loads), be certain to evaluate the  
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that  
is greater than its rated voltage.  
www.rohm.com  
2009.10 - Rev.B  
1/3  
c
2009 ROHM Co., Ltd. All rights reserved.  

与LTR10EVHFL1R58相关器件

型号 品牌 获取价格 描述 数据表
LTR10EVHFL1R60 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.6ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount
LTR10EVHFL1R74 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.74ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL1R80 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.8ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount
LTR10EVHFL1R82 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.82ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL1R91 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 1.91ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL2R05 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 2.05ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL2R10 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 2.1ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount
LTR10EVHFL2R26 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 2.26ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL2R32 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 2.32ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun
LTR10EVHFL2R43 ROHM

获取价格

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 2.43ohm, 1% +/-Tol, 150ppm/Cel, Surface Moun