LT6372-1
Precision Instrumentation Amplifier with
Level Shift and Output Clamping
FEATURES
DESCRIPTION
The LT®6372-1 is a gain programmable, high precision
instrumentation amplifier that delivers industry leading
DC precision. This high precision enables smaller sig-
nals to be sensed and eases calibration requirements,
particularly over temperature. The LT6372-1 incorporates
features into the LT6370 which further improve accuracy
and simplify interfacing to an ADC.
n
Single Gain Set Resistor: G = 1 to >1000
Excellent DC Precision
n
n
Input Offset Voltage: 60μV Max
n
Input Offset Voltage Drift: 0.6μV/°C Max
n
Low Gain Error: 0.01% Max (G = 1)
n
Low Gain Drift: 35ppm/°C Max (G > 1)
High DC CMRR: 86dB Min (G = 1)
n
n
n
n
n
n
Integrated Output Clamps
The LT6372-1 uses a proprietary high performance bipo-
lar process which enables industry leading accuracy cou-
pled with exceptional long-term stability. The LT6372-1
is laser trimmed for very low input offset voltage (60µV)
and high CMRR (86dB, G = 1). Proprietary on-chip test
capability allows the gain drift (35ppm/°C) to be guaran-
teed with automated testing.
Integrated Output Level Shift
Input Bias Current: 800pA Max
3.1MHz –3dB Bandwidth (G = 1)
Low Noise:
n
0.1Hz to 10Hz Noise: 0.2μV
P-P
n
1kHz Voltage Noise: 7nV/√Hz
n
n
n
n
Integrated Input RFI Filter
Wide Supply Range 4.75V to 35V
The LT6372-1’s difference amplifier uses a split reference
configuration which simplifies level shifting the amplifier’s
output to the center of the ADC’s input range. Output
clamp pins are also provided to limit the voltage which can
be applied to an ADC’s input. EMI filtering is integrated on
the LT6372-1’s inputs to maintain accuracy in the pres-
ence of harsh RF interference.
Temperature Ranges: –40°C to 85°C and –40°C to 125°C
MS16E and 20-Lead 3mm × 4mm QFN Packages
APPLICATIONS
n
Bridge Amplifier
n
The LT6372-1 is available in a compact MS16E or a 20-pin
3mm x 4mm QFN. The LT6372-1 is fully specified over the
Data Acquisition
n
Thermocouple Amplifier
n
–40°C to 85°C and –40°C to 125°C temperature ranges.
Strain Gauge Amplifier
All registered trademarks and trademarks are the property of their respective owners.
n
Medical Instrumentation
n
Transducer Interfaces
n
Differential to Single-Ended Conversion
LT6372–1 Driving LTC2367–16 with
Level Shift and Output Clamping
TYPICAL APPLICATION
ꢀ
+15V
LTC6655-5
V
ꢀ ꢁ ꢂ00
REF
V
V
OUT
IN
ꢀ
ꢀ
ꢀꢁꢁꢂꢀ
ꢀꢁꢂꢁꢃ
ꢀꢁꢀꢂꢂ
ꢀꢁꢀꢂꢃ
ꢀꢁꢀ0ꢂ
0
ꢀꢁꢂꢃꢁꢂ
ꢀꢁꢂꢃꢄeꢅ
ꢀꢁꢂꢃꢄꢃve
ꢀeveꢁ ꢂꢃꢄꢅꢆeꢇ
+
ꢀꢁ ꢂRꢃꢄꢅꢆ
2.5V
VDD
10V
ꢀ
REF2
REF
350Ω
350Ω
350Ω
91Ω
R
G
CLHI
CLLO
ꢀ
LT6372-1
REF1
243Ω
LTC2367-16
GND
10nF
COG
ꢀꢁꢂꢃꢁꢂ
ꢀꢁꢂꢃꢄeꢅ
ꢀeꢁꢂꢃꢄve
+
ꢀ
V
IN
350Ω
–
–
0
–15V
GAIN OF 100 BRIDGE AMPLIFIER
ꢀꢁ
6372-1 TA01a
ꢀꢁ00 ꢀꢁꢂ ꢀꢁ0 ꢀꢁꢂ
0
ꢀꢁ ꢀ0 ꢀꢁ ꢀ00
ꢀ
ꢀꢁꢂꢃ
ꢀꢁ
ꢀꢁꢂꢃꢄ ꢅꢆ0ꢄꢇ
Rev. 0
1
Document Feedback
For more information www.analog.com