LT1207
Dual 250mA/60MHz
Current Feedback Amplifier
U
DESCRIPTIO
EATURE
S
F
The LT®1207 is a dual version of the LT1206 high speed
current feedback amplifier. Like the LT1206, each CFA in
thedualhasexcellentvideocharacteristics:60MHzband-
width, 250mA minimum output drive current, 400V/µs
minimum slew rate, low differential gain (0.02% typ) and
low differential phase (0.17° typ). The LT1207 includes a
pin for an optional compensation network which stabi-
lizes the amplifier for heavy capacitive loads. Both ampli-
fiershavethermalandcurrentlimitcircuitswhichprotect
againstfaultconditions.ThesecapabilitiesmaketheLT1207
well suited for driving difficult loads such as cables in video
or digital communication systems.
■
■
■
■
■
■
■
■
250mA Minimum Output Drive Current
60MHz Bandwidth, AV = 2, RL = 100Ω
900V/µs Slew Rate, AV = 2, RL = 50Ω
0.02% Differential Gain, AV = 2, RL = 30Ω
0.17° Differential Phase, AV = 2, RL = 30Ω
High Input Impedance: 10MΩ
Shutdown Mode: IS < 200µA per Amplifier
Stable with CL = 10,000pF
U
APPLICATIO S
■
ADSL/HDSL Drivers
■
Video Amplifiers
■
Cable Drivers
Operation is fully specified from ±5V to ±15V supplies.
Supply current is typically 20mA per amplifier. Two
micropower shutdown controls place each amplifier in a
high impedance low current mode, dropping supply
current to 200µA per amplifier. For reduced bandwidth
applications, supply current can be lowered by adding a
resistor in series with the Shutdown pin.
■
RGB Amplifiers
■
Test Equipment Amplifiers
■
Buffers
The LT1207 is manufactured on Linear Technology's
complementary bipolar process and is available in a low
thermal resistance 16-lead SO package.
, LTC and LT are registered trademarks of Linear Technology Corporation.
U
TYPICAL APPLICATION
HDSL Driver
5V
+
0.1µF*
2.2µF**
+
V
IN
SHDN A
1/2 LT1207
62Ω
–
L1
720Ω
720Ω
720Ω
15k
15k
240Ω
–
*CERAMIC
**TANTALUM
62Ω
SHDN B
1/2 LT1207
L1 = TRANSPOWER SMPT–308
OR SIMILAR DEVICE
+
+
2.2µF**
0.1µF*
–5V
1207 • TA01
1