Spec No.: JELF243B_0044J-01
P4/9
10. Specification of Packaging
10.1 Appearance and dimensions of tape (8 mm width/plastic tape)
A
B
t
2.25±0.1
2.75±0.1
1.3±0.1
t'
0.25±0.05
(in mm)
* The dimensions of the cavity are measured at its bottom.
10.2 Taping specifications
Packing quantity
3000 pcs/reel
(Standard quantity)
Packing method
Feed hole position
Joint
The products are placed in embossed cavities of a plastic tape and sealed by a cover tape.
The feed holes on the plastic tape are on the right side when the cover tape is pulled toward the user.
The plastic tape and the cover tape are seamless.
Number of missing
products
Number of missing products within 0.025% of the number per reel or 1 pc., whichever is greater, and
are not continuous. The specified quantity per reel is kept.
10.3 Break down force of tape
Break down force of plastic tape
Break down force of cover tape
10 N min.
5 N min.
10.4 Peeling off force of cover tape
Speed of peeling off
300 mm/min
0.1 N to 0.7 N (The lower limit is for typical value.)
Peeling off force
165 to 180 degree
F
Cover tape
Plastic tape
10.5 Dimensions of leader section, trailer section and reel
A vacant section is provided in the leader (start) section and trailer (end) section of the tape for the product. The leader
section is further provided with an area consisting only of the cover tape (or top tape). (See the diagram below.)
MURATA MFG CO., LTD