Datasheet > LQH43MN5R6K03#

LQH43MN5R6K03#

更新时间： 2023-09-03 20:28:23

品牌	Logo	应用领域
村田 - MURATA		/
页数	文件大小	规格书
10页	319K
描述

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LQH43MN5R6K03# 数据手册

SpecNo.JELF243A-0164B-01

P10/10

11.9 Caution for use

・Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush, shall not be touched to the

winding portion to prevent the breaking of wire.

・Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core.

11.10 Handling of a substrate

After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the

substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to

the substrate.

Excessive mechanical stress may cause cracking in the product.

Bending

Twisting

11.11 Storage and Handling Requirements

(1) Storage period

Use the products within 12 months after delivered.

Solderability should be checked if this period is exceeded.

(2) Storage conditions

・Products should be stored in the warehouse on the following conditions.

Temperature : -10 ~ 40°C

Humidity

: 15 to 85% relative humidity No rapid change on temperature and humidity

The electrode of the products is coated with solder. Don't keep products in corrosive gases such as sulfur,

chlorine gas or acid, or it may cause oxidization of electrode, resulting in poor solderability.

・Products should not be stored on bulk packaging condition to prevent the chipping of the core and the breaking

of winding wire caused by the collision between the products.

・Products should be stored on the palette for the prevention of the influence from humidity, dust and so on.

・Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on.

(3) Handling Condition

Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock.

12.

Note

(1) Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your

product.

(2) You are requested not to use our product deviating from the agreed specifications.

(3) The contents of this reference specification are subject to change without advance notice. Please approve our

product specifications or transact the approval sheet for product specifications before ordering.

MURATA MFG.CO., LTD

1...7 8 910

下载PDF

与LQH43MN5R6K03#相关器件

型号	品牌	描述	获取价格	数据表
LQH43MN5R6K03K	MURATA	Chip Inductor (Chip Coil) for General Use Wire Wound Type LQH43M/LQH43N Series	获取价格
LQH43MN5R6K03L	MURATA	Chip Inductor (Chip Coil) for General Use Wire Wound Type LQH43M/LQH43N Series	获取价格
LQH43MN680J01K	MURATA	General Purpose Inductor, 68uH, 5%, 1 Element, Ferrite-Core, SMD, CHIP	获取价格
LQH43MN680J03#	MURATA		获取价格
LQH43MN680J03B	MURATA	General Purpose Inductor, 68uH, 5%, 1 Element, Ferrite-Core, SMD, CHIP, 1812	获取价格
LQH43MN680J03K	MURATA	Chip Inductor (Chip Coil) for General Use Wire Wound Type LQH43M/LQH43N Series	获取价格