SpecNo.JELF243A-9121B-01
P3/7
Reference Only
AEC-Q200
Murata Specification / Deviation
No
Stress
Test Method
17 ESD
Per AEC-Q200-002
ESD Rank: Refer to Item 3. Rating.
No defects
18 Solderbility
Per J-STD-002
Method b : Not Applicable
90% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Measured : Inductance
Per UL-94
No defects
Characterization
20 Flammability
21 Board Flex
Not Applicable
Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Murata deviation request: 30s
No defects
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
No defects
8.Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
1.5+0.1
Lead-in/out wire
※
-0
(0.2)
0.2
The packing directions of the chip coil
in taping are unified with the in/out
positions of the lead wire.
※
Dimension of the Cavity is measured
at the bottom side.
4.0±0.1
4.0±0.1
(in mm)
2.1±0.1
2.9±0.2
2.0±0.05
Direction of feed
8.2 Specification of Taping
(1) Packing quantity (standard quantity)
2,000 pcs / reel
(2) Packing Method
Products shall be packed in the each embossed cavity of plastic tape and sealed by cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Plastic tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.025% of the number per reel or 1 pc., whichever is greater,
and are not continuous. The specified quantity per reel is kept.
8.3 Pull Strength
Embossed carrier tape
Cover tape
10N min.
5N min.
8.4 Peeling off force of cover tape
165 to 180 degree
F
Cover tape
Plastic tape
Speed of Peeling off
300mm/min
0.2 to 0.7N
Peeling off force
(minimum value is typical)
MURATA MFG.CO., LTD