Document 438NR-1
Shielded Power Inductors
–
LPS3008
• Very low DCR; excellent current handling
• Only 0.8 mm tall; 3.0 × 3.0 mm footprint
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 22 – 25 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
(Refer to dimensional drawing for part orientation in tape.)
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3008-104MLC
Termination: L=RoHS compliant silver-palladium-
platinum-glass frit.
Part number1
LPS3008-561ML_
LPS3008-801ML_
LPS3008-102ML_
LPS3008-152ML_
LPS3008-222ML_
0.56
0.80
1.0
1.5
2.2
0.072 330
0.092 255
0.125 220
0.134 170
0.175 150
1.8
1.6
1.3
1.1
1.0
2.0
1.7
1.4
1.3
1.1
2.1
1.8
1.5
1.3
1.1
1.4
1.1
2.0
1.6
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
0.90 1.3
0.87 1.2
0.85 1.1
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS3008-332ML_
LPS3008-472ML_
LPS3008-562ML_
LPS3008-682ML_
LPS3008-822ML_
3.3
4.7
5.6
6.8
8.2
0.285 114
0.81 0.86 0.88 0.74 0.95
0.68 0.73 0.74 0.68 0.80
0.62 0.67 0.70 0.58 0.73
0.58 0.61 0.63 0.50 0.67
0.52 0.56 0.58 0.45 0.60
0.350
0.450
0.500
0.600
87
78
75
61
B=Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
LPS3008-103ML_
LPS3008-123ML_
LPS3008-183ML_
LPS3008-223ML_
LPS3008-333ML_
10
0.650
0.790
1.25
1.50
2.30
56
49
38
35
23
0.46 0.51 0.52 0.42 0.56
0.45 0.48 0.50 0.38 0.50
0.35 0.38 0.40 0.33 0.44
0.29 0.33 0.34 0.29 0.38
0.27 0.30 0.31 0.25 0.32
12
18
22
33
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
LPS3008-473ML_
LPS3008-683ML_
LPS3008-104ML_ 100
LPS3008-124ML_ 120
LPS3008-154ML_ 150
47
68
3.00
4.75
6.85
7.00
8.00
21
18
14
13
11
0.22 0.23 0.24 0.21 0.27
0.18 0.19 0.20 0.175 0.23
0.15 0.16 0.16 0.160 0.21
0.084 0.094 0.10 0.140 0.190
0.080 0.088 0.092 0.130 0.175
LPS3008-184ML_ 180
LPS3008-224ML_ 220
LPS3008-334ML_ 330
9.00
11.5
18.0
10
9
7
0.070 0.078 0.082 0.120 0.160
0.067 0.073 0.076 0.100 0.145
0.059 0.064 0.066 0.090 0.130
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 438NR-1 Revised 09/16/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.